Scanning Moisture Meter
Scanning Moisture Meter
Scanning Moisture Meter
Scanning Moisture Meter
Scanning Moisture Meter
Scanning Moisture Meter
Sper Scientific

850002

Scanning Moisture Meter

Regular price $171.00 $0.00 Unit price per

Accurately reads elevated moisture content using cutting-edge electromagnetic wave technology that penetrates 1½” through most materials.

Sper Scientific's pinless moisture meter can quickly indicate the moisture content of materials with measured CM% function. The depth of penetration is about 20-40mm. There is also a measure and hold function as well as a min/max display setting. The Sper Scientific pin-less moisture meter comes with an alarm function and low battery indication. Auto power off feature. A white backlit LCD display.

The round metal probe will not scratch surfaces and automatically calibrates to dry air. The probe can be held at any angle and reads 0 to 100% moisture in wood and drywall for building inspection, lumber, water damage repair, and other industries. The large LCD simultaneously displays current, maximum and minimum moisture content, has a bright backlight and a low battery indicator. Features adjustable audible and visible, Hi/Low wetness risk alarm, auto-power-off and a hold function. Comes ready to use with clear instructions and 3 AAA batteries.

  • Relative Pinless moisture reading for non-invasive measurement from 0.0 to 100.0% with 0.1 resolution
  • Multifunction backlit triple LCD display
  • Pinless measurement depth from 0.78" (20mm) to 1.6" (40mm) below the surface
  • High frequency sensing technology
  • Automatic Data Hold
  • Two adjustable alarm levels with audible beeper and visual (flashing “RISK” or “WET”) indicators
  • Automatic calibration (in dry air) when the meter is powered on
  • Low battery indication
  • Auto Power off
  • 5 year warranty, CE

Dimensions: 9.25 x 2.5 x 1.1" (235x63x28mm)
Weight: 7.7oz (218g)

 

  Materials Resolution Accuracy
Moisture Content All soft and hard woods including but not limited to Pine, Poplar, Oak, Maple, and Teak. 0.1% ±2%
All forms of drywall and sheetrock including cementboard, ¼” and ½” gypsum drywall, soundboard, and greenboard.
NOTE: This meter is not appropriate for testing concrete, brick, mortar, or screed
Operating Temperature and Humidity 0 to 40°C
And less than 85% Relative Humidity
Reading Depth Range 40 mm

CE

Share this Product