The Sanwa DCM600DR is a True RMS Digital Clamp Meter / Multimeter designed for use in CAT III environments.
This DCM600DR can measure a maximum of 600 Amperes of AC/DC current. It can measure AC/DC current up to 600 Volts, the resistance of 999.9Ω, and perform continuity tests with a buzzer alarm. This device is suitable for current and voltage measurements of low-voltage circuitry, electric equipment, and power supply facilities.
The device offers various functions such as data hold, peak hold, zero, etc. It features a 6000-count display with a back-light feature. The device also has an auto-power save feature that turns the screen off after 30 minutes of no use.
Meter includes one set of test leads, carrying case and instruction manual.
- AC/DC current measurable max. 600A & DMM function
- True RMS
- 6000 count LCD with Backlight
- Data hold
- Relative value
- Peak hold (1ms)
- Auto power save (30min after the last operation) (non-cancelable)
Specifications
| Function |
Range |
Accuracy |
Resolution |
Input Impedance |
| DCA |
60/600A |
±(2%+5) |
0.01A |
|
| ACA |
60/600A |
±(2%+5) |
0.01A |
| DCV |
600V |
±(1%+2) |
0.1V |
1MΩ |
| ACV |
600V |
±(1.2%+5) |
0.1V |
| Resistance |
999.9Ω |
±(1%+7) |
0.1Ω |
|
| Continuity |
Buzzer sounds at less than 40Ω
Open voltage: Approx. 2.9V |
| Sampling rate |
3 times/sec. |
| Bandwidth |
50-500Hz |
| Display |
6000 |
| Clamp diameter/Conductor size |
Φ30mm/10×50mm |
| Battery |
LR03×2 |
| Battery life |
Approx. 40 hrs. (Backlight off) |
| Size/Mass |
H208×W69×D38mm
Approx. 260g |
| Safety standards |
IEC61010 CAT.Ⅲ600V |
|
*In the peak hold mode, the measuring range is fixed at 600A. |
|
