The Sanwa DCL31DR is a compact DC/AC digital clamp meter with an RMS response feature.
The DCL31DR can measure a current of up to 400 Amperes in both AC and DC modes with an accuracy of 3% when in AC mode. The DCL31DR offers many features such as a 6000-count large LCD display with a backlight, a Data Hold function for pausing the measurement on screen, a Peak Hold function for detecting the peak value of AC current to pausing it, and a Zero setting feature that allows users to remove DC offsets before measuring DC currents.
This device allows you to measure the current range specified in IEC61010-1 CAT. III 300V and is suitable for measuring the current of low-voltage power lines and electrical appliances. The clamp sensor in the DCL31DR has a maximum input current rating of 320 Amperes (AC/DC) and has a maximum input protection rating of 450 Amperes (AC/DC).
Meter includes carry pouch, strap and instruction manual.
- Compact Pocket Size Design
- 6000 Count Display with Backlight
- 3% Accuracy in AC Mode & 2% Accuracy in DC Mode
- True RMS Conversion
- Auto Power Off
- Data Hold / Peak Hold
- Zero Setting
| Function |
Range |
Accuracy |
Resolution |
| DCA |
60/400A |
±(2.0%+5) |
0.01A |
| ACA |
60/400A |
±(2.0%+5) |
0.01A |
| Sampling rate |
2 times/sec. |
| Bandwidth |
45-400Hz |
| Display |
6000 |
| Clamp diameter/Conductor size |
25mm/10x26mm |
| Battery |
LR03x2 |
| Battery life |
Approx. 35 hrs. |
| Size/Mass |
H145xW54xD31mm / Approx. 120g |
| Safety standards |
IEC61010 CAT.III 300V |
|
*In the peak hold mode, the
measuring range is fixed at 400A. |
