{"title":"Signal Analyzers","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eSignal analyzers provide detailed insight into RF signals, helping engineers measure frequency, power, modulation quality and unwanted emissions.\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e Used in electronics development, wireless communications and industrial testing, these instruments support signal characterization, interference troubleshooting and EMC pre-compliance evaluation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUNI-T signal analyzers offer a range of capabilities for demanding bench applications, with selected models combining real-time spectrum analysis, vector network analysis and tracking generators. Optional measurement packages expand support for analog and digital demodulation, helping engineers evaluate signal quality, capture intermittent events and characterize RF components.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"uts3060a-6-0-ghz-performance-series-signal-analyzer","title":"UTS3060A 6.0 GHz Performance-Series Signal Analyzer","description":"\u003ch1\u003eUNI-T UTS3060A Signal Analyzer | 6 GHz Real-Time Spectrum + VNA + Tracking Generator\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eThe UNI-T UTS3060A is a 6.0 GHz real-time signal analyzer with built-in vector network analyzer (VNA) and tracking generator — a different class of instrument from a swept-spectrum analyzer, sized for advanced RF design, EMC engineering and modulated-carrier characterization.\u003c\/strong\u003e Frequency coverage runs 9 kHz to 6 GHz with 1 Hz resolution; minimum resolution bandwidth is 1 Hz; maximum resolution bandwidth is 10 MHz; typical displayed average noise level reaches -165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on); and phase noise runs -100 dBc\/Hz typical at 10 kHz offset. The 10.1-inch 1280 × 800 capacitive multi-touch display surfaces real-time, swept, VNA, and (with optional licenses) demodulation modes without burying them behind soft-key paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe UTS3000A is built around three architectural pillars that swept-spectrum analyzers do not have: real-time spectrum analysis, vector network analysis with S11\/S21, and digital signal demodulation.\u003c\/strong\u003e Real-time spectrum is standard at 10 MHz bandwidth (extendable to 40 MHz with the optional UTS3000A-B40 license), with 100% probability-of-intercept at 6.68 µs minimum signal duration. The VNA covers the full 100 kHz to 6 GHz spectrum range with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration — the reflection bridge is internal. Digital demodulation (optional UTS3000A-VSA) covers ASK, FSK, PSK, QAM, MSK, and DPSK with EVM measurement. The UTS3060A delivers the full Performance-Series capability stack across the entire sub-6 GHz consumer-radio frequency space — 5G NR n77\/n78\/n79, Wi-Fi 6E, and sub-6 GHz cellular all on one bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Coverage:\u003c\/strong\u003e 9 kHz to 6 GHz signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Spectrum (Standard):\u003c\/strong\u003e 10 MHz default; 40 MHz optional with UTS3000A-B40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In VNA (Standard):\u003c\/strong\u003e S11 + S21, Smith chart, polar coordinates (100 kHz to 6 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Generator (Standard):\u003c\/strong\u003e 100 kHz to 6 GHz, output -40 to 0 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e DANL -165 dBm\/Hz typical (200 MHz to 1.5 GHz, preamp on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Noise:\u003c\/strong\u003e -100 dBc\/Hz typical at 10 kHz offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution Bandwidth:\u003c\/strong\u003e 1 Hz to 10 MHz in 1-3-10 steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep Resolution:\u003c\/strong\u003e 40,001 sweep points; minimum RBW 1 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Trace Display:\u003c\/strong\u003e 12 real-time \/ 6 swept simultaneous traces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Mask Trigger:\u003c\/strong\u003e FMT for transient and episodic signal capture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 10.1-inch 1280 × 800 capacitive multi-touch HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e USB-Host, USB-Device, LAN (VXI-11), HDMI, 10 MHz reference in\/out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammability:\u003c\/strong\u003e SCPI over USB-TMC, Socket, VXI-11; WebServer; LabVIEW; NI-VISA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Packages:\u003c\/strong\u003e B40, AMK, EMI, AMA, VSA (digital demod), I\/Q Analyzer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUNI-T UTS3060A Detailed Features\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Coverage (9 kHz to 6 GHz)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS3060A covers 9 kHz to 6 GHz with 1 Hz frequency resolution — full sub-6 GHz consumer-radio reach. The range covers the complete 5G NR n77 (3.3–4.2 GHz), n78 (3.3–3.8 GHz), and n79 (4.4–5.0 GHz) mid-band allocations, Wi-Fi 6E in the 6 GHz unlicensed band, sub-6 GHz cellular, and microwave power-amplifier characterization across the C-band lower segment. Tracking generator and VNA modes cover the full 100 kHz to 6 GHz range — stimulus-response measurement is supported across the analyzer’s entire frequency reach.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eReal-Time Spectrum Analysis (Standard)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReal-time spectrum analysis is included as standard, not as an option or upsell. Default real-time bandwidth is 10 MHz; the optional UTS3000A-B40 license extends this to 40 MHz. The signature display mode is the density spectrogram — consecutive FFT frames overlaid with probability-density coloration, surfacing low-amplitude signals hidden under stronger ones and revealing time-frequency structure that swept measurement collapses into a single trace. Maximum sampling rate 51.2 MSa\/s; FFT rate 146,253 frames\/second nominal; 12 simultaneous traces (vs. 6 swept). Eight display modes cover Normal, Density, Spectrogram, PvT, PvT Spectrum, PvT Spectrogram, Powergram, Powergram Spectrogram. The 100% probability-of-intercept minimum signal duration is 6.68 µs at 40 MHz span (default Kaiser window) — a guaranteed-capture spec swept analyzers fundamentally cannot match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBuilt-In VNA: S11 + S21 (100 kHz to 6 GHz, Standard)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVector network analysis is included as standard, not as a separate instrument or option. S11 reflection and S21 transmission cover the full 100 kHz to 6 GHz range — matching the analyzer’s spectrum reach — with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration. Display formats include logarithmic and linear amplitude, phase, group delay, SWR, real and imaginary parts, Smith chart (multiple variants), and polar coordinate. Mechanical calibration: Open, Short, Load, Through, Custom — supported by the UT-3009F\/M cal kit (DC to 9 GHz). 101 to 10,001 measurement points (default 201); 10 markers; IF bandwidth 100 Hz to 1 MHz. The reflection bridge is internal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFrequency Mask Template Trigger (FMT)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Frequency Mask Template (FMT) trigger captures episodic and transient signals that exceed a user-defined spectral mask. Mask types: Upper, Lower, Both. Trigger criteria: Enter, Leave, Inside, Outside, Enter-Leave, Leave-Enter — supporting both threshold-crossing and dwell-time qualification. Combined with the real-time spectrum mode and 6.68 µs 100% POI minimum signal duration, FMT captures intermittent emissions, transient interference, and frequency-hopping transitions that fall between sweeps on a swept-spectrum analyzer. For radar pulse analysis, EMI event capture, and protocol-state spectral characterization, FMT is the trigger architecture that turns rare events into reliable measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eDigital Signal Demodulation (UTS3000A-VSA Option)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe optional UTS3000A-VSA Vector Signal Analyzer license adds digital demodulation across the modulation-scheme set used in modern radio: ASK (2\/4\/8\/16), FSK (2\/4\/8\/16), PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, QAM (16\/32\/64\/128\/256), and MSK. Symbol error statistics include EVM (rms and peak), magnitude error, phase error, IQ offset, carrier offset, SNR, quadrature error, and gain imbalance. Display formats: constellation diagrams, IQ time-domain plots, eye diagrams (I and Q), and error-vector time\/frequency-domain views. Measurement filters: Raised Cosine, RRC, Gaussian, EDGE, CDMA, rectangular; symbol length 10 to 4,096; over-sampling rates 4 through 20. For modulated-carrier characterization where the question is signal quality on a bench-grade radio design, the VSA option replaces a separate vector signal analyzer instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSensitivity for Weak-Signal Detection (DANL -165 dBm\/Hz typ.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDisplayed average noise level (DANL) reaches -165 dBm\/Hz typical with the preamplifier engaged in the 200 MHz to 1.5 GHz band, and -166 dBm\/Hz typical at 10 MHz to 200 MHz — the deepest sensitivity in the Performance Series. Across band, typical preamp-on DANL tracks from -153 dBm\/Hz at 1–10 MHz to -158 dBm\/Hz at the 7.5–8.4 GHz upper edge. With 0 dB attenuation, 1 Hz RBW, sample or average detection, and average \u0026gt;50, the noise floor supports detection of the low-amplitude phenomena that distinguish a quiet design from a marginal one — weak spurious emissions on power amplifiers, low-microwave harmonic content from wide-band gap power stages, and modulated-carrier signal-integrity work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eEMI Pre-Compliance Testing (UTS3000A-EMI Option)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe optional UTS3000A-EMI package adds CISPR-specification resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz at −6 dB), quasi-peak and EMI-average detectors, and built-in limit masks for the major regulatory standards (AS-NZS, BellCore, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI; plus custom limits). Scan workflow supports Scan-Search-Measure with signal-table reporting. Combined with the optional UTS-EMI01 near-field probe kit (four probes covering 30 MHz to 3 GHz), the analyzer supports radiated-emission pre-compliance measurement on the engineering bench — useful for catching mitigation needs before the compliance lab visit.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eComprehensive Interface Set\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFront-panel interfaces include the RF input (50 Ω, N-type female) and the tracking-generator source output (50 Ω, N-type female). The 10.1-inch capacitive multi-touch display is also front-panel. Rear-panel interfaces support automated test integration: HDMI 1.4 video output for an external monitor; USB-Host (USB-A) for thumb-drive screenshot\/data export and firmware update; USB-Device (USB-B) for direct PC connection over SCPI; LAN (VXI-11, 10\/100\/1000 Base, RJ-45) for network-based remote control; 10 MHz reference input\/output (BNC, 50 Ω) for synchronization with other instruments; external trigger input (TTL, BNC); and audio output (3.5 mm). SCPI is supported over both USB and LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSCPI, WebServer, and Multi-Platform Remote Control\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemote control supports SCPI over USB-TMC, Socket, and VXI-11; web-browser access through the built-in WebServer (PCs and mobile phones); LabVIEW and NI-VISA driver compatibility; and the UNI-T Device Manager software (V2.5.0 and higher) for instrument management over LAN or USB flash drive. The WebServer enables remote viewing, trace-data export, and SCPI control without installing a driver — useful for distributed test setups and for remote bench monitoring during long-duration EMC sweeps. The 10.1-inch capacitive multi-touch HD display (1280 × 800 native, RGB vertical pixel layout) provides the local user interface with drag-to-pan, pinch-to-zoom, and tap-to-place-marker gesture support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced RF Design and 5G NR Characterization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 5G NR mid-band device characterization spanning the full n77 (3.3–4.2 GHz), n78 (3.3–3.8 GHz), and n79 (4.4–5.0 GHz) allocations, Wi-Fi 6E unlicensed (6 GHz), and sub-6 GHz cellular, the UTS3060A delivers the same real-time + VNA + tracking-generator capability set as the entry SKU extended across the full sub-6 GHz consumer-radio frequency space on a single instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eEMC Pre-Compliance and Power-Electronics EMI\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor sub-6 GHz microwave power-amplifier characterization where the question is gain, harmonic suppression, and matching across the operating band, the built-in VNA delivers S21 gain sweeps with 80 dB dynamic range, the real-time spectrum mode catches harmonic content during pulsed operation, and the digital demodulation option (UTS3000A-VSA) qualifies modulated-signal performance with EVM measurement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eVNA Component Characterization and Network Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor full sub-6 GHz component characterization — cellular and Wi-Fi-band antennas, sub-6 GHz filters, S-band\/C-band amplifiers, and transmission-line VSWR measurement — the built-in VNA with S11 reflection and S21 transmission measurement covers the full 100 kHz to 6 GHz range with the UT-3009F\/M calibration kit (DC to 9 GHz) and the analyzer’s mechanical Open\/Short\/Load\/Through\/Custom calibration suite.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eAccessories \u0026amp; In the Box\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord × 1\u003c\/li\u003e\n\u003cli\u003eUT-D14 USB cable × 1\u003c\/li\u003e\n\u003cli\u003eUTS3060A signal analyzer (instrument)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Optional Accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-3009F\/M VNA Calibration Kit\u003c\/strong\u003e — recommended pairing for VNA mode (DC to 9 GHz; supports Open\/Short\/Load\/Through mechanical calibration).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3000A-B40\u003c\/strong\u003e — extends real-time bandwidth from 10 MHz to 40 MHz (license-key unlock).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3000A-AMK\u003c\/strong\u003e Advanced Measurement Kit; \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e EMI Pre-Compliance; \u003cstrong\u003eUTS3000A-AMA\u003c\/strong\u003e Analog Demodulation; \u003cstrong\u003eUTS3000A-VSA\u003c\/strong\u003e Vector Signal Analyzer (digital demod); \u003cstrong\u003eUTS3000A-I\/Q\u003c\/strong\u003e I\/Q Analyzer — license-key software unlocks (see FAQ for capability summary).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/strong\u003e — four probes covering 30 MHz to 3 GHz for radiated-emission scouting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-CK01 Cable and Adapter Accessory Kit\u003c\/strong\u003e — SMA-N adapters and cables for general RF bench work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-T01 \/ UTS-T02 Antenna Pairs\u003c\/strong\u003e — Wi-Fi\/Bluetooth (2400–2500 MHz) and cellular-band (824–960 \/ 1710–1990 MHz) antenna pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat is the tracking generator and VNA frequency range?\u003c\/h3\u003e\n\u003cp\u003eOn the UTS3060A, both the tracking generator and the VNA cover \u003cstrong\u003e100 kHz to 6 GHz\u003c\/strong\u003e — the full spectrum range of the analyzer. TG output adjusts -40 to 0 dBm in 0.5 dB steps with ±3 dB flatness referenced to 50 MHz. VNA mode supports S11\/S21 with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration. The reflection bridge is internal. Recommended cal kit: UT-3009F\/M (DC to 9 GHz).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhich features are standard and which require optional packages?\u003c\/h3\u003e\n\u003cp\u003eThe UTS3000A includes \u003cstrong\u003eSpectrum Analyzer\u003c\/strong\u003e, \u003cstrong\u003eReal-time Spectrum Analyzer\u003c\/strong\u003e (10 MHz default real-time bandwidth), \u003cstrong\u003eVector Network Analyzer\u003c\/strong\u003e (S11 + S21), and \u003cstrong\u003eTracking Generator\u003c\/strong\u003e as \u003cstrong\u003estandard\u003c\/strong\u003e, at no extra cost. Six \u003cstrong\u003eoptional\u003c\/strong\u003e license-key software unlocks extend the capability set: \u003cstrong\u003eUTS3000A-B40\u003c\/strong\u003e (extends real-time bandwidth to 40 MHz), \u003cstrong\u003eUTS3000A-AMK\u003c\/strong\u003e (Advanced Measurement Kit: channel power, ACP, OBW, CNR, TOI, harmonics), \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e (EMI pre-compliance with CISPR RBWs and quasi-peak\/EMI-average detectors), \u003cstrong\u003eUTS3000A-AMA\u003c\/strong\u003e (analog AM\/FM\/PM demod), \u003cstrong\u003eUTS3000A-VSA\u003c\/strong\u003e (digital demod: ASK\/FSK\/PSK\/QAM\/MSK\/DPSK with EVM), and \u003cstrong\u003eUTS3000A-I\/Q\u003c\/strong\u003e (50 Hz to 8.4 GHz I\/Q analysis with 14-bit ADC, 51.2 MSa\/s).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eDoes this analyzer support EMI pre-compliance testing?\u003c\/h3\u003e\n\u003cp\u003eYes, with the optional \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e package. EMI mode adds CISPR-specification resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz at −6 dB), quasi-peak and EMI-average detectors, a peak Scan-Search-Measure sweep workflow, and built-in limit masks for the major regulatory standards (AS-NZS, BellCore, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI; plus custom limits). Combined with the optional \u003cstrong\u003eUTS-EMI01 near-field probe kit\u003c\/strong\u003e (four probes covering 30 MHz to 3 GHz), the analyzer supports radiated-emission pre-compliance measurement on the engineering bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHow does the UTS3000A differ from the UTS3000T+ family?\u003c\/h3\u003e\n\u003cp\u003eThe UTS3000A and UTS3000T+ are different classes of instrument for different audiences. The \u003cstrong\u003eUTS3000T+ is a swept-spectrum analyzer\u003c\/strong\u003e with optional analysis kits — sized for value-tier RF design, education, and pre-compliance EMI work. The \u003cstrong\u003eUTS3000A is a Performance-Series real-time signal analyzer\u003c\/strong\u003e with built-in VNA and digital demodulation — sized for advanced RF design, professional EMC, and modulated-carrier characterization where capturing transient and modulated signals is the measurement workload.\u003cbr\u003e\u003cbr\u003eConcrete differences: \u003cstrong\u003ereal-time spectrum\u003c\/strong\u003e is standard on the A (10 MHz, optionally 40 MHz with B40); the T+ has no real-time mode. \u003cstrong\u003eVNA with S11\/S21, Smith chart, polar coordinate\u003c\/strong\u003e is standard on the A; the T+ supports basic reflection only with an external bridge accessory. \u003cstrong\u003eRBW range\u003c\/strong\u003e extends to 10 MHz on the A vs 3 MHz on the T+ flagship pair. \u003cstrong\u003ePhase noise\u003c\/strong\u003e is -100 dBc\/Hz typ at 10 kHz on the A vs \u0026lt;-98 dBc\/Hz on the T+. \u003cstrong\u003eReal-time traces\u003c\/strong\u003e support 12 simultaneous traces on the A vs 6 swept on the T+ flagship pair. The A also adds the Frequency Mask Template trigger (FMT) and the optional UTS3000A-VSA digital demodulation package — capabilities not available on the T+. Pricing reflects the architectural difference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 kHz to 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase Noise (10 kHz \/ 1 MHz offset)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-100 dBc\/Hz typ \/ -112 dBc\/Hz typ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplitude Precision\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.7 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 kHz to 3.6 GHz, ±0.6 dB; 3.6 to 6 GHz, ±0.8 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplayed Average Noise Level (typ.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResolution Bandwidth (RBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz to 10 MHz in 1-3-10 steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVideo Bandwidth (VBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz to 10 MHz in 1-3-10 steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep Points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Traces (swept \/ real-time)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 swept \/ 12 real-time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSample, Peak, Negative Peak, Normal, Average\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-Time Bandwidth (std. \/ opt.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MHz standard \/ 40 MHz with UTS3000A-B40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-Time 100% POI Min. Signal Duration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.68 µs at 40 MHz span (Kaiser window)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-Time FFT Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e146,253 frames\/second (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Generator Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kHz to 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTG Output Power Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 dBm to 0 dBm in 0.5 dB steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kHz to 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Measurement Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eS11 reflection, S21 transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA S21 Dynamic Range \/ S11 Directivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 dB \/ \u0026gt;40 dB (after cal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Measurement Points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e101 to 10,001 (default 201)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Calibration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen, Short, Load, Through, Custom (mechanical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Mask Trigger (FMT)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUpper, Lower, Both; 0.5 dB resolution; 0 s to 500 ms delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Continuous-Wave Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≤+30 dBm (attenuation \u0026gt;20 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Safe DC Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.1-inch 1280 × 800 capacitive multi-touch HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB-Host, USB-Device, LAN (VXI-11, 10\/100\/1000), HDMI 1.4, External Trigger, Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProgrammability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSCPI over USB-TMC, Socket, VXI-11; WebServer; LabVIEW; NI-VISA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 to 240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating \/ Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to +40 °C \/ -20 to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W × H × D) \/ Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e378 mm × 218 mm × 120 mm (W × H × D) \/ 4.96 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003eMulti-language safety manual\u003c\/li\u003e\n\u003cli\u003eCalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware options (model number — description):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000A-AMA — AM\/FM Analog Demodulation Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-B40 — 40MHz Real-Time Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-EMI — EMI Pre-Compliance Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-I\/Q — I\/Q Modulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-NR40 — UTS3000A-NR 5G 40MHz New Radio Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-PNM — Phase Noise Measurement option for UTS3000A series\u003c\/li\u003e\n\u003cli\u003eUTS3000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-VSA — Vector Signal Analysis Demodulation Option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703410065632,"sku":"181200100041X","price":8099.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS3060A-1.png?v=1790967672"},{"product_id":"uts7040a-40-ghz-interceptor-series-signal-analyzer","title":"UTS7040A 40 GHz Interceptor-Series Signal Analyzer","description":"\u003ch1\u003eThe UNI-T UTS7040A is a 40 GHz signal analyzer for commercial wireless, IoT, EMI pre-compliance, and R\u0026amp;D characterization work. It covers 2 Hz – 40 GHz on a single chassis, with −167 dBm\/Hz displayed average noise level (DANL with preamplifier engaged) and 100,001 sweep points across the span.\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eThe UTS7040A is the 40 GHz flagship of the UTS7000A line. Real-time spectrum analysis is included as a base instrument capability with 40 MHz analysis bandwidth standard, software-expandable to 85, 160, or 255 MHz via the B-series license options.\u003c\/strong\u003e A full ecosystem of measurement options — 5G NR demodulation, vector signal analysis, I\/Q capture, EMI pre-compliance, phase noise, advanced power measurements, analog demodulation, and LTE FDD\/TDD — expands the same hardware platform to specialized workflows without buying a second instrument.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing Your Model: UTS7000A Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A name spans eight models on one signal-analyzer platform. The series splits into two configurations: a wide-band configuration (40 MHz baseline real-time bandwidth, software-expandable to 255 MHz) and a narrow-band –NB configuration (20 MHz fixed real-time bandwidth, no upgrade path). Sampling, sweep points, phase noise, DANL, display, interface, and option compatibility are identical across all eight models. Choose the maximum frequency your work requires, then choose the bandwidth configuration.\u003c\/p\u003e\n\u003ctable style=\"table-layout: fixed; width: 100%;\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 22%;\"\u003e \u003ccol style=\"width: 24%;\"\u003e \u003ccol style=\"width: 32%;\"\u003e \u003ccol style=\"width: 22%;\"\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eMax Frequency\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eReal-Time Bandwidth\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003ePaired Preamplifier\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"text-align: center;\"\u003e\u003cstrong\u003eUTS7000A — Wide-Band Configuration \u003cbr\u003e(40 MHz RTSA, software-expandable to 255 MHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7026A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"text-align: center;\"\u003e\u003cstrong\u003eUTS7000A–NB — Narrow-Band Configuration \u003cbr\u003e(20 MHz RTSA, fixed, no upgrade path)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7026A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eChoose the narrow-band –NB configuration \u003c\/strong\u003ewhen your signals do not require real-time bandwidth beyond 20 MHz — narrow-channel monitoring, single-carrier characterization, slow-hopping signal capture, or EMI pre-compliance on conducted-emissions spans. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eChoose the wide-band configuration\u003c\/strong\u003e when wideband real-time capture matters: multi-carrier signals, 5G NR FR2 component carriers, wideband modulated payloads, or transient capture across spans up to 255 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 2 Hz to 40 GHz, single chassis, no band switching\u003c\/li\u003e\n\u003cli\u003e−167 dBm\/Hz displayed average noise level with the UTS7000A-P40 preamplifier engaged\u003c\/li\u003e\n\u003cli\u003ePhase noise \u0026lt;−110 dBc\/Hz\u003c\/li\u003e\n\u003cli\u003eReal-time spectrum analysis included — 40 MHz baseline, software-expandable to 85, 160, or 255 MHz\u003c\/li\u003e\n\u003cli\u003e100,001 sweep points, six traces, 1 Hz to 10 MHz RBW range\u003c\/li\u003e\n\u003cli\u003e11.6-inch TFT-LCD touchscreen with full front-panel keyboard\u003c\/li\u003e\n\u003cli\u003eUSB 3.0, USB 2.0, LAN, HDMI, 10 MHz reference In\/Out, dual trigger inputs\u003c\/li\u003e\n\u003cli\u003eNine software-licensed measurement options on one platform — 5G NR, VSA, I\/Q, EMI, PNM, AMA, AMK, FDD-LTE, TDD-LTE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUNI-T UTS7040A Details\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eReal-Time Spectrum Analysis — 40 MHz Standard, Software-Expandable to 255 MHz\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReal-time spectrum analysis is part of the base instrument. The UTS7040A ships configured for 40 MHz of real-time analysis bandwidth and achieves 100% frequency-domain signal capture in under 3.21 µs, so transient and intermittent signals that a swept analyzer would miss are captured into the trace. The instrument supports density spectrum, spectrogram (waterfall), and Power-vs-Time displays simultaneously, plus a Frequency Mask Template (FMT) trigger for capture on signal arrival, departure, or shape change.\u003c\/p\u003e\n\u003cp\u003eWider real-time bandwidth is added by software license without changing chassis. The UTS7000A-B85 raises the real-time bandwidth to 85 MHz, the UTS7000A-B160 to 160 MHz, and the UTS7000A-B255 to 255 MHz — sufficient to capture 5G NR FR2 component carriers and wideband modulated payloads in a single record. The license unlock is field-installable on any 40 MHz wide-band UTS7000A chassis and remains permanent for the life of the instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eFrequency Range to 40 GHz with Optional Preamplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7040A covers 2 Hz – 40 GHz on a single chassis — no band switching, no external mixers, no second instrument for the higher-frequency portion of the range. The UTS7000A-P40 preamplifier is the paired sensitivity option for this chassis. With the preamplifier engaged, displayed average noise level reaches −167 dBm\/Hz — the floor that small-signal characterization, near-noise-level demodulation, and weak-emitter EMI work depend on. Each chassis in the UTS7000A line has its own paired preamp matched to the chassis's frequency range; the P40 is correct for the 40 GHz chassis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e5G NR Demodulation Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-NR option adds 5G New Radio demodulation analysis directly on the instrument. Combined with the UTS7040A's 40 GHz frequency reach and the real-time bandwidth options up to 255 MHz, the chassis supports commercial 5G NR characterization across sub-6 GHz (FR1) plus the FR2 millimeter-wave bands n257 (26.5–29.5 GHz), n258 (24.25–27.5 GHz), n261 (27.5–28.35 GHz), and n260 (37–40 GHz to the chassis ceiling) used in commercial fixed wireless access and base-station equipment development.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eVector Signal Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-VSA option provides general-purpose vector signal analysis with constellation, EVM, and symbol-rate measurement across the major digital modulation families — PSK, QAM, FSK, MSK, and ASK variants. Symbol rate is set from 1 ksps up to the instrument's analysis bandwidth divided by symbol points. Used for protocol bring-up on custom radios, IQ-based modulation verification, and digital-radio R\u0026amp;D where the modulation scheme is not a standardized cellular waveform.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eI\/Q Signal Analyzer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-I\/Q option captures complex baseband I and Q time-record data alongside the frequency-domain view. The captured I\/Q record supports both time-domain and frequency-domain inspection of the same signal, useful for protocol-level debug, custom-modulation verification, and post-capture analysis in external tools where the raw IQ samples are needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eEMI Pre-Compliance Testing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for EMI pre-compliance work with CISPR-style detectors (including quasi-peak), pre-defined limit lines, and meter-mode measurement at fixed frequencies. Pre-scan plus final-scan workflows let a development team identify probable emissions failures and characterize their spectral content before scheduling certified-chamber time. Conducted-emissions spans (Band A, Band B) and broader radiated-emissions sweeps are both supported on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003ePhase Noise Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-PNM option provides one-touch phase noise measurement at user-selected offset frequencies, with dBc\/Hz log-plot display. Used for oscillator characterization, synthesizer evaluation, and reference-clock qualification where the instrument's own phase noise floor (\u0026lt;−110 dBc\/Hz) is well below the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eAdvanced Measurement Kit — TOI, OBW, Channel Power, ACPR, CNR, Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-AMK option adds a set of one-touch power and spectral measurements for routine RF characterization work — third-order intercept (TOI), occupied bandwidth (OBW), channel power, adjacent-channel power ratio (ACPR), carrier-to-noise ratio (CNR), harmonic analysis, time-domain power, and spectrum monitoring. Each is a dedicated measurement screen rather than a manual sequence of marker placements, which is the practical difference for production-floor characterization and overnight automated sweeps.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog and LTE Demodulation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-AMA option adds analog demodulation analysis for AM, FM, and PM signals, with measurement of carrier, modulation depth, frequency deviation, SINAD, and total harmonic distortion. The UTS7000A-FDD-LTE and UTS7000A-TDD-LTE options add 3GPP LTE demodulation for FDD and TDD signals respectively, with per-resource-block EVM, frame and slot synchronization, PDSCH and PUSCH characterization, and OFDM signal analysis. Each is a separate license and operates as a dedicated measurement mode on the instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003ePrimary Applications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR Sub-6 and Commercial Wireless Equipment Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7040A's 40 GHz frequency reach covers commercial 5G NR sub-6 (FR1) plus the FR2 commercial millimeter-wave bands n257 \/ n258 \/ n261 in full and n260 to the chassis ceiling, supporting commercial base-station development, fixed wireless access equipment, and 5G UE characterization. The UTS7000A-NR demodulation option, the real-time bandwidth options up to 255 MHz, and the I\/Q time-record option are the three pieces a typical commercial 5G NR bench will use together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eWireless and IoT Protocol Bring-Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 2.4 GHz and 5 GHz commercial bands — Wi-Fi 6 \/ 6E, Bluetooth, Zigbee, LoRa, and custom proprietary radios — the chassis pairs with the UTS7000A-VSA for digital modulation characterization and the UTS7000A-I\/Q for time-record capture used in protocol-level debug and post-capture analysis. Real-time analysis bandwidth options support wideband channels and frequency-hopping signal capture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eEMI Pre-Compliance and Spectral Hygiene\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for conducted and radiated emissions pre-compliance work — CISPR-style detectors including quasi-peak, pre-defined limit lines, and pre-scan plus final-scan workflows. For power-electronics designs where switching-frequency emissions and harmonics need to be characterized before chamber time, the combination of EMI option plus the UTS7000A-AMK measurement kit (harmonic analysis, spectrum monitoring) supports a complete pre-compliance bench on one instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eR\u0026amp;D Characterization and Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor general signal-analysis R\u0026amp;D work — oscillator and synthesizer phase-noise qualification, intermodulation distortion measurement, spurious search, weak-signal detection, and long-duration spectrum monitoring — the chassis's −167 dBm\/Hz noise floor (with preamp), 100,001 sweep points, six trace memories, and real-time density-spectrum display cover the day-to-day workflows. The UTS7000A-PNM phase noise option and the UTS7000A-AMK measurement kit are the most-used adds for this work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eOptions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal-time bandwidth options\u003c\/strong\u003e (software licenses, wide-band configuration only):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePaired preamplifier option\u003c\/strong\u003e (frequency-matched to this chassis):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-P40 — preamplifier for UTS7040A and UTS7040A-NB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurement function options\u003c\/strong\u003e (software-licensed; compatible with all UTS7000A chassis including –NB):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR demodulation analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — vector signal analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q signal analyzer\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI pre-compliance testing\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — phase noise measurement\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — advanced measurement kit\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMA — analog demodulation (AM\/FM\/PM)\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — LTE FDD demodulation\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — LTE TDD demodulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch3\u003eWhich preamplifier do I order with the UTS7040A?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-P40 is the matched preamplifier for the 40 GHz chassis. Each chassis in the UTS7000A line has its own frequency-matched preamp; using a preamp from a lower-frequency chassis would limit the sensitivity range you can use across the UTS7040A's full span.\u003c\/p\u003e\n\u003ch3\u003eIs the tracking generator included or available as an option?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A line does not include a tracking generator on any chassis. For scalar network analysis on a UNI-T signal-analyzer platform with a built-in tracking generator, the UTS5000A series is the alternate instrument.\u003c\/p\u003e\n\u003ch3\u003eCan the real-time analysis bandwidth be expanded after purchase?\u003c\/h3\u003e\n\u003cp\u003eYes — the UTS7040A ships with 40 MHz real-time bandwidth and can be expanded by adding the UTS7000A-B85 (85 MHz), UTS7000A-B160 (160 MHz), or UTS7000A-B255 (255 MHz) bandwidth options. These are field-installable software licenses — purchase, register, and install via the chassis Option Install menu.\u003c\/p\u003e\n\u003ch3\u003eAre the measurement options installed in the factory, or can I license them later?\u003c\/h3\u003e\n\u003cp\u003eThe nine measurement options — 5G NR, VSA, I\/Q, EMI, PNM, AMK, AMA, FDD-LTE, TDD-LTE — install as software licenses on the instrument and can be added at any time after purchase. Each option installs and activates independently.\u003c\/p\u003e\n\u003ch3\u003eDoes the UTS7040A support remote programming and automation?\u003c\/h3\u003e\n\u003cp\u003eYes. The instrument supports SCPI programming over LAN and USB, with the standard interface set including USB 3.0 host, USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz reference In\/Out, external reference input, and two trigger inputs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-time analysis bandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; software-expandable to 85 \/ 160 \/ 255 MHz via B-option licenses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplayed average noise level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−167 dBm\/Hz (with UTS7000A-P40 preamp engaged)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase noise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;−110 dBc\/Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.001 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResolution bandwidth (RBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz (10% steps), 4 \/ 5 \/ 6 \/ 8 \/ 10 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eup to 100,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTraces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.6-inch TFT-LCD touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 \/ USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz Ref In\/Out, Ext Ref In, 2× Trigger In, Headphone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking generator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003emulti-language safety manual\u003c\/li\u003e\n\u003cli\u003ecalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware options (model number — description):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-AMA — Analog Demodulation Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q Analyzer Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P13 — 13.6 GHz Preamplifier Option for UTS7013A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P26 — 26.5 GHz Preamplifier Option for UTS7026A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P32 — 32 GHz Preamplifier Option for UTS7032A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P40 — 40 GHz Preamplifier Option for UTS7040A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — Phase Noise Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — Vector Signal Analysis Option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703410098400,"sku":"181200100067X","price":50399.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS7000A-1.png?v=1790967672"},{"product_id":"uts7013a-13-6-ghz-interceptor-series-signal-analyzer","title":"UTS7013A 13.6 GHz Interceptor-Series Signal Analyzer","description":"\u003ch1\u003eThe UNI-T UTS7013A is a 13.6 GHz signal analyzer for commercial wireless, IoT, EMI pre-compliance, and R\u0026amp;D characterization work. It covers 2 Hz – 13.6 GHz on a single chassis, with −167 dBm\/Hz displayed average noise level (DANL with preamplifier engaged) and 100,001 sweep points across the span.\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eThe UTS7013A is a 13.6 GHz member of the UTS7000A wide-band signal analyzer line. Real-time spectrum analysis is included as a base instrument capability with 40 MHz analysis bandwidth standard, software-expandable to 85, 160, or 255 MHz via the B-series license options.\u003c\/strong\u003e A full ecosystem of measurement options — 5G NR demodulation, vector signal analysis, I\/Q capture, EMI pre-compliance, phase noise, advanced power measurements, analog demodulation, and LTE FDD\/TDD — expands the same hardware platform to specialized workflows without buying a second instrument.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eChoosing Your Model — UTS7000A Series\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A name spans eight models on one signal-analyzer platform. The series splits into two configurations: a wide-band configuration (40 MHz baseline real-time bandwidth, software-expandable to 255 MHz) and a narrow-band –NB configuration (20 MHz fixed real-time bandwidth, no upgrade path). Sampling, sweep points, phase noise, DANL, display, interface, and option compatibility are identical across all eight models. Choose the maximum frequency your work requires, then choose the bandwidth configuration.\u003c\/p\u003e\n\u003ctable style=\"table-layout: fixed; width: 100%;\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 22%;\"\u003e \u003ccol style=\"width: 24%;\"\u003e \u003ccol style=\"width: 32%;\"\u003e \u003ccol style=\"width: 22%;\"\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eMax Frequency\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eReal-Time Bandwidth\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003ePaired Preamplifier\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"text-align: center;\"\u003e\u003cstrong\u003eUTS7000A — Wide-Band Configuration \u003cbr\u003e(40 MHz RTSA, software-expandable to 255 MHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7026A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"text-align: center;\"\u003e\u003cstrong\u003eUTS7000A–NB — Narrow-Band Configuration \u003cbr\u003e(20 MHz RTSA, fixed, no upgrade path)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7026A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003eChoose the narrow-band –NB configuration when your signals do not require real-time bandwidth beyond 20 MHz — narrow-channel monitoring, single-carrier characterization, slow-hopping signal capture, or EMI pre-compliance on conducted-emissions spans. Choose the wide-band configuration when wideband real-time capture matters: multi-carrier signals, 5G NR FR2 component carriers, wideband modulated payloads, or transient capture across spans up to 255 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 2 Hz to 13.6 GHz, single chassis, no band switching\u003c\/li\u003e\n\u003cli\u003e−167 dBm\/Hz displayed average noise level with the UTS7000A-P13 preamplifier engaged\u003c\/li\u003e\n\u003cli\u003ePhase noise \u0026lt;−110 dBc\/Hz\u003c\/li\u003e\n\u003cli\u003eReal-time spectrum analysis included — 40 MHz baseline, software-expandable to 85, 160, or 255 MHz\u003c\/li\u003e\n\u003cli\u003e100,001 sweep points, six traces, 1 Hz to 10 MHz RBW range\u003c\/li\u003e\n\u003cli\u003e11.6-inch TFT-LCD touchscreen with full front-panel keyboard\u003c\/li\u003e\n\u003cli\u003eUSB 3.0, USB 2.0, LAN, HDMI, 10 MHz reference In\/Out, dual trigger inputs\u003c\/li\u003e\n\u003cli\u003eNine software-licensed measurement options on one platform — 5G NR, VSA, I\/Q, EMI, PNM, AMA, AMK, FDD-LTE, TDD-LTE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUNI-T UTS7013A Details\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eReal-Time Spectrum Analysis — 40 MHz Standard, Software-Expandable to 255 MHz\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReal-time spectrum analysis is part of the base instrument. The UTS7013A ships configured for 40 MHz of real-time analysis bandwidth and achieves 100% frequency-domain signal capture in under 3.21 µs, so transient and intermittent signals that a swept analyzer would miss are captured into the trace. The instrument supports density spectrum, spectrogram (waterfall), and Power-vs-Time displays simultaneously, plus a Frequency Mask Template (FMT) trigger for capture on signal arrival, departure, or shape change.\u003c\/p\u003e\n\u003cp\u003eWider real-time bandwidth is added by software license without changing chassis. The UTS7000A-B85 raises the real-time bandwidth to 85 MHz, the UTS7000A-B160 to 160 MHz, and the UTS7000A-B255 to 255 MHz — sufficient to capture 5G NR FR2 component carriers and wideband modulated payloads in a single record. The license unlock is field-installable on any 40 MHz wide-band UTS7000A chassis and remains permanent for the life of the instrument.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Range to 13.6 GHz with Optional Preamplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7013A covers 2 Hz – 13.6 GHz on a single chassis — no band switching, no external mixers, no second instrument for the higher-frequency portion of the range. The UTS7000A-P13 preamplifier is the paired sensitivity option for this chassis. With the preamplifier engaged, displayed average noise level reaches −167 dBm\/Hz — the floor that small-signal characterization, near-noise-level demodulation, and weak-emitter EMI work depend on. Each chassis in the UTS7000A line has its own paired preamp matched to the chassis's frequency range; the P13 is correct for the 13.6 GHz chassis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR Demodulation Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-NR option adds 5G New Radio demodulation analysis directly on the instrument. Combined with the UTS7013A's 13.6 GHz frequency reach and the real-time bandwidth options up to 255 MHz, the chassis supports commercial 5G NR characterization across the sub-6 GHz (FR1) commercial bands — including n78 (3.3–3.8 GHz), n79 (4.4–5.0 GHz), and the wider Wi-Fi 6E unlicensed 6 GHz spectrum — used in commercial mobile network development, fixed wireless access equipment, and wireless device characterization. FR2 millimeter-wave bands begin at 24.25 GHz and require a higher-frequency chassis in the UTS7000A line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eVector Signal Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-VSA option provides general-purpose vector signal analysis with constellation, EVM, and symbol-rate measurement across the major digital modulation families — PSK, QAM, FSK, MSK, and ASK variants. Symbol rate is set from 1 ksps up to the instrument's analysis bandwidth divided by symbol points. Used for protocol bring-up on custom radios, IQ-based modulation verification, and digital-radio R\u0026amp;D where the modulation scheme is not a standardized cellular waveform.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eI\/Q Signal Analyzer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-I\/Q option captures complex baseband I and Q time-record data alongside the frequency-domain view. The captured I\/Q record supports both time-domain and frequency-domain inspection of the same signal, useful for protocol-level debug, custom-modulation verification, and post-capture analysis in external tools where the raw IQ samples are needed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEMI Pre-Compliance Testing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for EMI pre-compliance work with CISPR-style detectors (including quasi-peak), pre-defined limit lines, and meter-mode measurement at fixed frequencies. Pre-scan plus final-scan workflows let a development team identify probable emissions failures and characterize their spectral content before scheduling certified-chamber time. Conducted-emissions spans (Band A, Band B) and broader radiated-emissions sweeps are both supported on the same instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePhase Noise Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-PNM option provides one-touch phase noise measurement at user-selected offset frequencies, with dBc\/Hz log-plot display. Used for oscillator characterization, synthesizer evaluation, and reference-clock qualification where the instrument's own phase noise floor (\u0026lt;−110 dBc\/Hz) is well below the device under test.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced Measurement Kit — TOI, OBW, Channel Power, ACPR, CNR, Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-AMK option adds a set of one-touch power and spectral measurements for routine RF characterization work — third-order intercept (TOI), occupied bandwidth (OBW), channel power, adjacent-channel power ratio (ACPR), carrier-to-noise ratio (CNR), harmonic analysis, time-domain power, and spectrum monitoring. Each is a dedicated measurement screen rather than a manual sequence of marker placements, which is the practical difference for production-floor characterization and overnight automated sweeps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog and LTE Demodulation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-AMA option adds analog demodulation analysis for AM, FM, and PM signals, with measurement of carrier, modulation depth, frequency deviation, SINAD, and total harmonic distortion. The UTS7000A-FDD-LTE and UTS7000A-TDD-LTE options add 3GPP LTE demodulation for FDD and TDD signals respectively, with per-resource-block EVM, frame and slot synchronization, PDSCH and PUSCH characterization, and OFDM signal analysis. Each is a separate license and operates as a dedicated measurement mode on the instrument.\u003c\/p\u003e\n\u003ch3\u003ePrimary Applications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR Sub-6 and Commercial Wireless Equipment Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7013A's 13.6 GHz frequency reach covers commercial 5G NR sub-6 (FR1) bands and the broader sub-15 GHz commercial wireless spectrum used in commercial mobile network development, fixed wireless access equipment, and wireless device characterization. The UTS7000A-NR demodulation option, the real-time bandwidth options up to 255 MHz, and the I\/Q time-record option are the three pieces a typical commercial 5G NR bench will use together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless and IoT Protocol Bring-Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 2.4 GHz and 5 GHz commercial bands — Wi-Fi 6 \/ 6E, Bluetooth, Zigbee, LoRa, and custom proprietary radios — the chassis pairs with the UTS7000A-VSA for digital modulation characterization and the UTS7000A-I\/Q for time-record capture used in protocol-level debug and post-capture analysis. Real-time analysis bandwidth options support wideband channels and frequency-hopping signal capture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEMI Pre-Compliance and Spectral Hygiene\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for conducted and radiated emissions pre-compliance work — CISPR-style detectors including quasi-peak, pre-defined limit lines, and pre-scan plus final-scan workflows. For power-electronics designs where switching-frequency emissions and harmonics need to be characterized before chamber time, the combination of EMI option plus the UTS7000A-AMK measurement kit (harmonic analysis, spectrum monitoring) supports a complete pre-compliance bench on one instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eR\u0026amp;D Characterization and Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor general signal-analysis R\u0026amp;D work — oscillator and synthesizer phase-noise qualification, intermodulation distortion measurement, spurious search, weak-signal detection, and long-duration spectrum monitoring — the chassis's −167 dBm\/Hz noise floor (with preamp), 100,001 sweep points, six trace memories, and real-time density-spectrum display cover the day-to-day workflows. The UTS7000A-PNM phase noise option and the UTS7000A-AMK measurement kit are the most-used adds for this work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAccessories and Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal-time bandwidth options\u003c\/strong\u003e (software licenses, wide-band configuration only):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePaired preamplifier option\u003c\/strong\u003e (frequency-matched to this chassis):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-P13 — preamplifier for UTS7013A and UTS7013A-NB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurement function options\u003c\/strong\u003e (software-licensed; compatible with all UTS7000A chassis including –NB):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR demodulation analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — vector signal analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q signal analyzer\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI pre-compliance testing\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — phase noise measurement\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — advanced measurement kit\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMA — analog demodulation (AM\/FM\/PM)\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — LTE FDD demodulation\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — LTE TDD demodulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch3\u003eWhich preamplifier do I order with the UTS7013A?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-P13 is the matched preamplifier for the 13.6 GHz chassis. Each chassis in the UTS7000A line has its own frequency-matched preamp; using a preamp from a lower-frequency chassis would limit the sensitivity range you can use across the UTS7013A's full span.\u003c\/p\u003e\n\u003ch3\u003eIs the tracking generator included or available as an option?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A line does not include a tracking generator on any chassis. For scalar network analysis on a UNI-T signal-analyzer platform with a built-in tracking generator, the UTS5000A series is the alternate instrument.\u003c\/p\u003e\n\u003ch3\u003eCan the real-time analysis bandwidth be expanded after purchase?\u003c\/h3\u003e\n\u003cp\u003eYes — the UTS7013A ships with 40 MHz real-time bandwidth and can be expanded by adding the UTS7000A-B85 (85 MHz), UTS7000A-B160 (160 MHz), or UTS7000A-B255 (255 MHz) bandwidth options. These are field-installable software licenses — purchase, register, and install via the chassis Option Install menu.\u003c\/p\u003e\n\u003ch3\u003eAre the measurement options installed in the factory, or can I license them later?\u003c\/h3\u003e\n\u003cp\u003eThe nine measurement options — 5G NR, VSA, I\/Q, EMI, PNM, AMK, AMA, FDD-LTE, TDD-LTE — install as software licenses on the instrument and can be added at any time after purchase. Each option installs and activates independently.\u003c\/p\u003e\n\u003ch3\u003eDoes the UTS7013A support remote programming and automation?\u003c\/h3\u003e\n\u003cp\u003eYes. The instrument supports SCPI programming over LAN and USB, with the standard interface set including USB 3.0 host, USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz reference In\/Out, external reference input, and two trigger inputs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-time analysis bandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; software-expandable to 85 \/ 160 \/ 255 MHz via B-option licenses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplayed average noise level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−167 dBm\/Hz (with UTS7000A-P13 preamp engaged)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase noise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;−110 dBc\/Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.001 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResolution bandwidth (RBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz (10% steps), 4 \/ 5 \/ 6 \/ 8 \/ 10 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eup to 100,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTraces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.6-inch TFT-LCD touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 \/ USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz Ref In\/Out, Ext Ref In, 2× Trigger In, Headphone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking generator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\n\u003cbr\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003emulti-language safety manual\u003c\/li\u003e\n\u003cli\u003ecalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware options (model number — description):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-AMA — Analog Demodulation Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q Analyzer Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P13 — 13.6 GHz Preamplifier Option for UTS7013A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P26 — 26.5 GHz Preamplifier Option for UTS7026A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P32 — 32 GHz Preamplifier Option for UTS7032A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P40 — 40 GHz Preamplifier Option for UTS7040A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — Phase Noise Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — Vector Signal Analysis Option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703410131168,"sku":"181200100065X","price":22499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS7000A-1_e9a15c9c-ae02-4c54-90d1-105fe58c680a.png?v=1790967672"},{"product_id":"uts7026a-26-5-ghz-interceptor-series-signal-analyzer","title":"UTS7026A 26.5 GHz Interceptor-Series Signal Analyzer","description":"\u003ch1\u003eThe UNI-T UTS7026A is a 26.5 GHz signal analyzer for commercial wireless, IoT, EMI pre-compliance, and R\u0026amp;D characterization work. It covers 2 Hz – 26.5 GHz on a single chassis, with −167 dBm\/Hz displayed average noise level (DANL with preamplifier engaged) and 100,001 sweep points across the span.\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eThe UTS7026A is a 26.5 GHz member of the UTS7000A wide-band signal analyzer line. Real-time spectrum analysis is included as a base instrument capability with 40 MHz analysis bandwidth standard, software-expandable to 85, 160, or 255 MHz via the B-series license options.\u003c\/strong\u003e A full ecosystem of measurement options — 5G NR demodulation, vector signal analysis, I\/Q capture, EMI pre-compliance, phase noise, advanced power measurements, analog demodulation, and LTE FDD\/TDD — expands the same hardware platform to specialized workflows without buying a second instrument.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing Your Model: UTS7000A Series\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A name spans eight models on one signal-analyzer platform. The series splits into two configurations: a wide-band configuration (40 MHz baseline real-time bandwidth, software-expandable to 255 MHz) and a narrow-band –NB configuration (20 MHz fixed real-time bandwidth, no upgrade path). Sampling, sweep points, phase noise, DANL, display, interface, and option compatibility are identical across all eight models. Choose the maximum frequency your work requires, then choose the bandwidth configuration.\u003c\/p\u003e\n\u003ctable style=\"table-layout: fixed; width: 100%;\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 22%;\"\u003e \u003ccol style=\"width: 24%;\"\u003e \u003ccol style=\"width: 32%;\"\u003e \u003ccol style=\"width: 22%;\"\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eMax Frequency\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eReal-Time Bandwidth\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003ePaired Preamplifier\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"text-align: center;\"\u003e\u003cstrong\u003eUTS7000A — Wide-Band Configuration \u003cbr\u003e(40 MHz RTSA, software-expandable to 255 MHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7026A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"4\" style=\"text-align: center;\"\u003e\u003cstrong\u003eUTS7000A–NB — Narrow-Band Configuration \u003cbr\u003e(20 MHz RTSA, fixed, no upgrade path)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7013A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7026A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7040A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eChoose the narrow-band –NB configuration when your signals do not require real-time bandwidth beyond 20 MHz — narrow-channel monitoring, single-carrier characterization, slow-hopping signal capture, or EMI pre-compliance on conducted-emissions spans. Choose the wide-band configuration when wideband real-time capture matters: multi-carrier signals, 5G NR FR2 component carriers, wideband modulated payloads, or transient capture across spans up to 255 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 2 Hz to 26.5 GHz, single chassis, no band switching\u003c\/li\u003e\n\u003cli\u003e−167 dBm\/Hz displayed average noise level with the UTS7000A-P26 preamplifier engaged\u003c\/li\u003e\n\u003cli\u003ePhase noise \u0026lt;−110 dBc\/Hz\u003c\/li\u003e\n\u003cli\u003eReal-time spectrum analysis included — 40 MHz baseline, software-expandable to 85, 160, or 255 MHz\u003c\/li\u003e\n\u003cli\u003e100,001 sweep points, six traces, 1 Hz to 10 MHz RBW range\u003c\/li\u003e\n\u003cli\u003e11.6-inch TFT-LCD touchscreen with full front-panel keyboard\u003c\/li\u003e\n\u003cli\u003eUSB 3.0, USB 2.0, LAN, HDMI, 10 MHz reference In\/Out, dual trigger inputs\u003c\/li\u003e\n\u003cli\u003eNine software-licensed measurement options on one platform — 5G NR, VSA, I\/Q, EMI, PNM, AMA, AMK, FDD-LTE, TDD-LTE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUNI-T UTS7026A Details\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eReal-Time Spectrum Analysis — 40 MHz Standard, Software-Expandable to 255 MHz\u003c\/h3\u003e\n\u003cp\u003eReal-time spectrum analysis is part of the base instrument. The UTS7026A ships configured for 40 MHz of real-time analysis bandwidth and achieves 100% frequency-domain signal capture in under 3.21 µs, so transient and intermittent signals that a swept analyzer would miss are captured into the trace. The instrument supports density spectrum, spectrogram (waterfall), and Power-vs-Time displays simultaneously, plus a Frequency Mask Template (FMT) trigger for capture on signal arrival, departure, or shape change.\u003c\/p\u003e\n\u003cp\u003eWider real-time bandwidth is added by software license without changing chassis. The UTS7000A-B85 raises the real-time bandwidth to 85 MHz, the UTS7000A-B160 to 160 MHz, and the UTS7000A-B255 to 255 MHz — sufficient to capture 5G NR FR2 component carriers and wideband modulated payloads in a single record. The license unlock is field-installable on any 40 MHz wide-band UTS7000A chassis and remains permanent for the life of the instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFrequency Range to 26.5 GHz with Optional Preamplifier\u003c\/h3\u003e\n\u003cp\u003eThe UTS7026A covers 2 Hz – 26.5 GHz on a single chassis — no band switching, no external mixers, no second instrument for the higher-frequency portion of the range. The UTS7000A-P26 preamplifier is the paired sensitivity option for this chassis. With the preamplifier engaged, displayed average noise level reaches −167 dBm\/Hz — the floor that small-signal characterization, near-noise-level demodulation, and weak-emitter EMI work depend on. Each chassis in the UTS7000A line has its own paired preamp matched to the chassis's frequency range; the P26 is correct for the 26.5 GHz chassis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003e5G NR Demodulation Analysis\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-NR option adds 5G New Radio demodulation analysis directly on the instrument. Combined with the UTS7026A's 26.5 GHz frequency reach and the real-time bandwidth options up to 255 MHz, the chassis supports commercial 5G NR characterization across sub-6 GHz (FR1) plus the lower portion of FR2 band n258 (24.25–26.5 GHz, the European 26 GHz mmWave band) used in commercial fixed wireless access and base-station equipment development. Higher FR2 bands (n257, n261, n260) require a higher-frequency chassis in the UTS7000A line.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eVector Signal Analysis\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-VSA option provides general-purpose vector signal analysis with constellation, EVM, and symbol-rate measurement across the major digital modulation families — PSK, QAM, FSK, MSK, and ASK variants. Symbol rate is set from 1 ksps up to the instrument's analysis bandwidth divided by symbol points. Used for protocol bring-up on custom radios, IQ-based modulation verification, and digital-radio R\u0026amp;D where the modulation scheme is not a standardized cellular waveform.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eI\/Q Signal Analyzer\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-I\/Q option captures complex baseband I and Q time-record data alongside the frequency-domain view. The captured I\/Q record supports both time-domain and frequency-domain inspection of the same signal, useful for protocol-level debug, custom-modulation verification, and post-capture analysis in external tools where the raw IQ samples are needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eEMI Pre-Compliance Testing\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for EMI pre-compliance work with CISPR-style detectors (including quasi-peak), pre-defined limit lines, and meter-mode measurement at fixed frequencies. Pre-scan plus final-scan workflows let a development team identify probable emissions failures and characterize their spectral content before scheduling certified-chamber time. Conducted-emissions spans (Band A, Band B) and broader radiated-emissions sweeps are both supported on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003ePhase Noise Analysis\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-PNM option provides one-touch phase noise measurement at user-selected offset frequencies, with dBc\/Hz log-plot display. Used for oscillator characterization, synthesizer evaluation, and reference-clock qualification where the instrument's own phase noise floor (\u0026lt;−110 dBc\/Hz) is well below the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eAdvanced Measurement Kit — TOI, OBW, Channel Power, ACPR, CNR, Spectrum Monitoring\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-AMK option adds a set of one-touch power and spectral measurements for routine RF characterization work — third-order intercept (TOI), occupied bandwidth (OBW), channel power, adjacent-channel power ratio (ACPR), carrier-to-noise ratio (CNR), harmonic analysis, time-domain power, and spectrum monitoring. Each is a dedicated measurement screen rather than a manual sequence of marker placements, which is the practical difference for production-floor characterization and overnight automated sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eAnalog and LTE Demodulation\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-AMA option adds analog demodulation analysis for AM, FM, and PM signals, with measurement of carrier, modulation depth, frequency deviation, SINAD, and total harmonic distortion. The UTS7000A-FDD-LTE and UTS7000A-TDD-LTE options add 3GPP LTE demodulation for FDD and TDD signals respectively, with per-resource-block EVM, frame and slot synchronization, PDSCH and PUSCH characterization, and OFDM signal analysis. Each is a separate license and operates as a dedicated measurement mode on the instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003ePrimary Applications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR Sub-6 and Commercial Wireless Equipment Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7026A's 26.5 GHz frequency reach covers commercial 5G NR sub-6 (FR1) plus the lower portion of FR2 band n258 (the European 26 GHz mmWave band), supporting commercial base-station development, fixed wireless access equipment, and 5G UE characterization within the n258 allocation. The UTS7000A-NR demodulation option, the real-time bandwidth options up to 255 MHz, and the I\/Q time-record option are the three pieces a typical commercial 5G NR bench will use together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless and IoT Protocol Bring-Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 2.4 GHz and 5 GHz commercial bands — Wi-Fi 6 \/ 6E, Bluetooth, Zigbee, LoRa, and custom proprietary radios — the chassis pairs with the UTS7000A-VSA for digital modulation characterization and the UTS7000A-I\/Q for time-record capture used in protocol-level debug and post-capture analysis. Real-time analysis bandwidth options support wideband channels and frequency-hopping signal capture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEMI Pre-Compliance and Spectral Hygiene\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for conducted and radiated emissions pre-compliance work — CISPR-style detectors including quasi-peak, pre-defined limit lines, and pre-scan plus final-scan workflows. For power-electronics designs where switching-frequency emissions and harmonics need to be characterized before chamber time, the combination of EMI option plus the UTS7000A-AMK measurement kit (harmonic analysis, spectrum monitoring) supports a complete pre-compliance bench on one instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eR\u0026amp;D Characterization and Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor general signal-analysis R\u0026amp;D work — oscillator and synthesizer phase-noise qualification, intermodulation distortion measurement, spurious search, weak-signal detection, and long-duration spectrum monitoring — the chassis's −167 dBm\/Hz noise floor (with preamp), 100,001 sweep points, six trace memories, and real-time density-spectrum display cover the day-to-day workflows. The UTS7000A-PNM phase noise option and the UTS7000A-AMK measurement kit are the most-used adds for this work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eReal-time bandwidth options\u003c\/strong\u003e (software licenses, wide-band configuration only):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePaired preamplifier option\u003c\/strong\u003e (frequency-matched to this chassis):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-P26 — preamplifier for UTS7026A and UTS7026A-NB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurement function options\u003c\/strong\u003e (software-licensed; compatible with all UTS7000A chassis including –NB):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR demodulation analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — vector signal analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q signal analyzer\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI pre-compliance testing\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — phase noise measurement\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — advanced measurement kit\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMA — analog demodulation (AM\/FM\/PM)\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — LTE FDD demodulation\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — LTE TDD demodulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch3\u003eWhich preamplifier do I order with the UTS7026A?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-P26 is the matched preamplifier for the 26.5 GHz chassis. Each chassis in the UTS7000A line has its own frequency-matched preamp; using a preamp from a lower-frequency chassis would limit the sensitivity range you can use across the UTS7026A's full span.\u003c\/p\u003e\n\u003ch3\u003eIs the tracking generator included or available as an option?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A line does not include a tracking generator on any chassis. For scalar network analysis on a UNI-T signal-analyzer platform with a built-in tracking generator, the UTS5000A series is the alternate instrument.\u003c\/p\u003e\n\u003ch3\u003eCan the real-time analysis bandwidth be expanded after purchase?\u003c\/h3\u003e\n\u003cp\u003eYes — the UTS7026A ships with 40 MHz real-time bandwidth and can be expanded by adding the UTS7000A-B85 (85 MHz), UTS7000A-B160 (160 MHz), or UTS7000A-B255 (255 MHz) bandwidth options. These are field-installable software licenses — purchase, register, and install via the chassis Option Install menu.\u003c\/p\u003e\n\u003ch3\u003eAre the measurement options installed in the factory, or can I license them later?\u003c\/h3\u003e\n\u003cp\u003eThe nine measurement options — 5G NR, VSA, I\/Q, EMI, PNM, AMK, AMA, FDD-LTE, TDD-LTE — install as software licenses on the instrument and can be added at any time after purchase. Each option installs and activates independently.\u003c\/p\u003e\n\u003ch3\u003eDoes the UTS7026A support remote programming and automation?\u003c\/h3\u003e\n\u003cp\u003eYes. The instrument supports SCPI programming over LAN and USB, with the standard interface set including USB 3.0 host, USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz reference In\/Out, external reference input, and two trigger inputs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUTS7026A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-time analysis bandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; software-expandable to 85 \/ 160 \/ 255 MHz via B-option licenses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplayed average noise level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−167 dBm\/Hz (with UTS7000A-P26 preamp engaged)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase noise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;−110 dBc\/Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.001 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResolution bandwidth (RBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz (10% steps), 4 \/ 5 \/ 6 \/ 8 \/ 10 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eup to 100,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTraces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.6-inch TFT-LCD touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 \/ USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz Ref In\/Out, Ext Ref In, 2× Trigger In, Headphone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking generator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003emulti-language safety manual\u003c\/li\u003e\n\u003cli\u003ecalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSoftware options (model number — description):\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-AMA — Analog Demodulation Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q Analyzer Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P13 — 13.6 GHz Preamplifier Option for UTS7013A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P26 — 26.5 GHz Preamplifier Option for UTS7026A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P32 — 32 GHz Preamplifier Option for UTS7032A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P40 — 40 GHz Preamplifier Option for UTS7040A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — Phase Noise Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — Vector Signal Analysis Option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703410163936,"sku":"181200100048X","price":27899.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS7000A-1_0a400cfa-592f-48d4-88dd-af760bfedccf.png?v=1790967672"},{"product_id":"uts5026a-26-5-ghz-performance-series-signal-analyzer","title":"UTS5026A 26.5 GHz Performance-Series Signal Analyzer","description":"\u003ch1\u003eThe UNI-T UTS5026A Performance-Series Signal Analyzer covers 9 kHz to 26.5 GHz in a single instrument, with -163 dBm\/Hz displayed average noise level (typical, with the UTS5000A-P26 preamp option) and -107 dBc\/Hz typical phase noise at 1 GHz, 10 kHz offset.\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eTotal absolute amplitude accuracy is ±0.40 dB at 50 MHz reference. RBW resolves from 1 Hz to 8 MHz and the analyzer captures up to 100,001 sweep points per trace.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS5026A is built around three pillars: \u003cstrong\u003efrequency reach\u003c\/strong\u003e through the K-band ceiling at 26.5 GHz, covering all sub-6 GHz cellular and Wi-Fi bands plus 5G mmWave-adjacent spectrum, SATCOM downlinks, and microwave point-to-point links; a \u003cstrong\u003equiet front end\u003c\/strong\u003e with -163 dBm\/Hz typical DANL (P26 option) and -107 dBc\/Hz typical phase noise that resolves low-level spurs and characterizes oscillator skirts cleanly; and a \u003cstrong\u003emodular measurement library\u003c\/strong\u003e covering vector signal demodulation, I\/Q capture, EMI pre-compliance, 5G NR and LTE air-interface decoding, dedicated phase-noise measurement, and analog AM\/FM demodulation — each available as a no-expiration license unlock. Engineered for RF and microwave design teams, EMC pre-compliance benches, cellular and SATCOM development groups, and private-sector test labs.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 kHz to 26.5 GHz\u003c\/strong\u003e spectrum measurement — covers sub-6 GHz, K-band, and microwave point-to-point bands in one instrument\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDANL: -163 dBm\/Hz typical\u003c\/strong\u003e (with UTS5000A-P26 preamp option, 20 MHz to 1.5 GHz, 1 Hz RBW); -150 dBm\/Hz typical baseline (preamp off)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase noise: -107 dBc\/Hz typical\u003c\/strong\u003e at 1 GHz, 10 kHz offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal absolute amplitude accuracy: ±0.40 dB at 50 MHz\u003c\/strong\u003e reference\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRBW: 1 Hz to 3 MHz in 10% steps\u003c\/strong\u003e, plus 4, 5, 6, 8 MHz wide-band settings; selectivity \u0026lt;4.1 : 1 nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep points: up to 100,001\u003c\/strong\u003e per trace; counter resolution 0.001 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrace detectors:\u003c\/strong\u003e Normal, Peak, Sample, Negative Peak, Log Power Average, RMS Average, Voltage Average\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum safe input:\u003c\/strong\u003e +27 dBm average \/ +47 dBm peak (gated)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e15.6-inch 1920×1080 multi-touch HD capacitive display\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional licenses:\u003c\/strong\u003e VSA (digital demod), I\/Q analyzer, EMI pre-compliance, 5G NR \/ LTE FDD \/ LTE TDD demod, AMA (analog AM\/FM), PNM (phase noise), AMK (advanced measurement kit), P26 (preamp gain)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterfaces:\u003c\/strong\u003e RF input (NMD 2.92 mm), 10 MHz Ext Ref In\/Out (BNC), Ext Trigger In (BNC, TTL), HDMI 1.4, USB-A 3.0 + USB-A 2.0 Host, USB-B 2.0 Device, LAN (VXI11)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFree firmware updates\u003c\/strong\u003e and \u003cstrong\u003eno-expiration license unlocks\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eDetailed Features\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e9 kHz to 26.5 GHz Frequency Coverage\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe UTS5026A spectrum input covers \u003cstrong\u003e9 kHz at the low end and 26.5 GHz at the high end\u003c\/strong\u003e, spanning eleven internal LO frequency bands to maintain calibrated response across the full range. That single-instrument reach removes the need for separate analyzers when work moves between sub-6 GHz cellular spectrum, ISM and Wi-Fi bands, K-band SATCOM downlinks, point-to-point microwave links, and radar IF chains.\u003c\/p\u003e\n\u003cp\u003eFrequency span is selectable from 0 Hz (zero-span time-domain capture) to the full 26.5 GHz range. Sweep time runs \u003cstrong\u003e1 ms to 4,000 s for spans ≥10 Hz\u003c\/strong\u003e, and 1 µs to 6,000 s in zero span for capturing transient events. The 10 MHz internal reference (with ±3×10⁻⁸ temperature stability) ties measurements to a stable timebase, with external 10 MHz reference in\/out on rear-panel BNC for shared-clock instrument racks.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eSensitivity for Low-Level Signal Detection (DANL -163 dBm\/Hz typ.)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eWeak-signal work — identifying low-level spurs in oscillator output, characterizing leakage from a shielded enclosure, capturing intermittent interference — is rate-limited by how far the analyzer’s own noise floor sits below the signal of interest. UTS5026A reaches \u003cstrong\u003e-163 dBm\/Hz typical DANL\u003c\/strong\u003e in the 20 MHz to 1.5 GHz band \u003cem\u003ewith the UTS5000A-P26 preamp option\u003c\/em\u003e, and \u003cstrong\u003e-160 dBm\/Hz typical\u003c\/strong\u003e across most of the analyzer’s mid-band range with preamp engaged. Without P26, baseline DANL runs \u003cstrong\u003e-145 to -150 dBm\/Hz typical\u003c\/strong\u003e mid-band — competitive for general spectrum work, but P26 is what unlocks the headline number.\u003c\/p\u003e\n\u003cp\u003ePreamp coverage extends from \u003cstrong\u003e100 kHz to 7.5 GHz\u003c\/strong\u003e on the low-frequency band and \u003cstrong\u003e100 kHz to 26.5 GHz\u003c\/strong\u003e on the high band. Maximum safe input is \u003cstrong\u003e+27 dBm average\u003c\/strong\u003e (input attenuation ≥20 dB, preamp on) and \u003cstrong\u003e+47 dBm peak\u003c\/strong\u003e for short-pulse work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePhase Noise (-107 dBc\/Hz typ.) for Clean Oscillator Characterization\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe local oscillator’s phase noise is the floor that limits how cleanly the analyzer can resolve close-in spurs, modulation sidebands, and reciprocal mixing artifacts on the device under test. UTS5026A specifies \u003cstrong\u003e-107 dBc\/Hz typical at 10 kHz offset\u003c\/strong\u003e from a 1 GHz carrier, with \u003cstrong\u003e-102 dBc\/Hz at 1 kHz\u003c\/strong\u003e, \u003cstrong\u003e-110 dBc\/Hz at 100 kHz\u003c\/strong\u003e, and \u003cstrong\u003e-132 dBc\/Hz at 1 MHz\u003c\/strong\u003e offset (typical, 1 kHz RBW, 10 Hz VBW, log-average over \u0026gt;50 acquisitions).\u003c\/p\u003e\n\u003cp\u003eFor RF designers characterizing PLL synthesizers, VCOs, and crystal oscillators, that envelope means close-in noise sidebands on the device under test sit above the analyzer’s own contribution rather than buried beneath it. The \u003cstrong\u003eUTS5000A-PNM Phase Noise Measurement option\u003c\/strong\u003e adds a dedicated measurement mode with logarithmic offset axes, jitter calculation, and integration limits.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRBW Resolution and Selectivity (1 Hz to 8 MHz)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eResolution Bandwidth selects from \u003cstrong\u003e1 Hz to 3 MHz in 10% steps\u003c\/strong\u003e (the standard 10:1 ratio family used across professional spectrum analyzers), plus dedicated \u003cstrong\u003e4, 5, 6, and 8 MHz\u003c\/strong\u003e wide-band settings for fast sweeps over wide spans. Bandwidth accuracy is \u003cstrong\u003e±1.0% (±0.044 dB) nominal\u003c\/strong\u003e from 1 Hz to 750 kHz.\u003c\/p\u003e\n\u003cp\u003eSelectivity (the −60 dB to −3 dB shape factor) measures \u003cstrong\u003e\u0026lt;4.1 : 1 nominal\u003c\/strong\u003e, which lets two adjacent unequal-amplitude carriers resolve cleanly without the smaller signal disappearing into the larger one’s skirt. Video bandwidth tracks the same range, and seven trace detectors cover both general-purpose and standards-specific measurement modes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e100,001 Sweep Points for Fine-Grained Frequency Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eSweep point count is configurable from \u003cstrong\u003e11 to 100,001 across all spans\u003c\/strong\u003e. At 100,001 points across a 1 GHz span, frequency resolution per trace bin is \u003cstrong\u003e10 kHz\u003c\/strong\u003e — tight enough to localize narrow-band interference, identify specific ITU channel allocations, and walk between adjacent regulatory mask boundaries without interpolation between coarse sweep bins.\u003c\/p\u003e\n\u003cp\u003eMarker resolution scales with the trace span and sweep-point count. A dedicated frequency counter mode tightens uncertainty further, with counter resolution at \u003cstrong\u003e0.001 Hz\u003c\/strong\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eVector Signal Analysis and I\/Q Capture (UTS5000A-VSA + UTS5000A-I\/Q Options)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003eUTS5000A-VSA Digital Demodulation option\u003c\/strong\u003e adds a vector demodulation engine covering \u003cstrong\u003e2 MHz to 26.5 GHz carrier\u003c\/strong\u003e and the major digital modulation formats: \u003cstrong\u003eASK (2-ASK); FSK (2\/4\/8\/16); MSK (GMSK); PSK (BPSK, QPSK, OQPSK, 8PSK); DPSK (DBPSK, DQPSK, D8PSK, π\/4-DQPSK, π\/8-D8PSK); QAM (16, 32, 64, 128, 256)\u003c\/strong\u003e. Symbol rate ranges \u003cstrong\u003e1 ksps to 2.5 Msps\u003c\/strong\u003e, with EVM\/SNR statistics displayed alongside IQ constellation, eye, and time-domain views.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eUTS5000A-I\/Q Analyzer option\u003c\/strong\u003e adds direct I\/Q capture and spectrum analysis at \u003cstrong\u003e9 kHz to 25 MHz analysis bandwidth standard (extended to 40 MHz with B40)\u003c\/strong\u003e, with a \u003cstrong\u003e14-bit ADC at 90 MSa\/s\u003c\/strong\u003e capturing up to 4,000,000 IQ sample pairs per acquisition. Window selection covers Flat-top, Uniform, Hanning, Gaussian, Blackman, Blackman-Harris, and Kaiser-Bessel shapes. Together, the two options form the foundation for waveform-level characterization of arbitrary digitally-modulated carriers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e5G NR and LTE Air-Interface Demodulation (UTS5000A-NR \/ FDD-LTE \/ TDD-LTE Options)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eFor teams developing 5G New Radio infrastructure, LTE base-station components, or cellular-band devices, three dedicated demodulation licenses extend the analyzer into protocol-aware air-interface measurement: \u003cstrong\u003eUTS5000A-NR for 5G New Radio\u003c\/strong\u003e, \u003cstrong\u003eUTS5000A-FDD-LTE\u003c\/strong\u003e, and \u003cstrong\u003eUTS5000A-TDD-LTE\u003c\/strong\u003e. Each license is a standalone purchase.\u003c\/p\u003e\n\u003cp\u003eCombined with the analyzer’s 26.5 GHz frequency reach, the cellular licenses cover sub-6 GHz LTE and 5G NR FR1 deployments directly, plus 5G NR FR2 mmWave bands at 24.25–26.5 GHz. The instrument’s low phase noise and tight amplitude accuracy translate into clean EVM measurements on the device under test. License unlocks are no-expiration: once added, they remain on the instrument for the life of the unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eEMI Pre-Compliance to 26.5 GHz (UTS5000A-EMI Option)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003eUTS5000A-EMI Pre-Compliance Measurement option\u003c\/strong\u003e transforms the analyzer into a CISPR\/EN-class pre-compliance instrument with regulatory limit lines, quasi-peak and average detectors, and band-segmented scan modes. Measurement extends to the analyzer’s full \u003cstrong\u003e26.5 GHz ceiling\u003c\/strong\u003e, covering not just the traditional 30 MHz to 1 GHz radiated-emissions band but also the higher-frequency emissions from 5G transceivers, automotive radar, and microwave data links.\u003c\/p\u003e\n\u003cp\u003eThe companion \u003cstrong\u003eUTS-EMI01 near-field probes kit\u003c\/strong\u003e adds four probe heads spanning 30 MHz to 3 GHz at three resolution scales plus a 5 mm resolution probe to 2 GHz, for localizing radiating components on a populated PCB. Pre-compliance use moves EMI debugging earlier in the development cycle — before the formal test-house chamber visit, when board-level fixes are still cheap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e15.6″ Multi-Touch HD Display and Serviceable Front End\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe front-panel display is a \u003cstrong\u003e15.6-inch 1920×1080 multi-touch capacitive TFT LCD\u003c\/strong\u003e — a deliberate departure from the 7-to-10-inch displays common at this frequency tier. Capacitive multi-touch supports drag-to-pan, pinch-zoom on traces, and gesture-based menu navigation, with the larger display real estate accommodating up to 4-window simultaneous layouts in the VSA and I\/Q modes. The instrument is built for serviceability over the warranty lifetime: a \u003cstrong\u003eremovable dust filter\u003c\/strong\u003e on the air inlet lifts out for cleaning, preventing the dust-accumulation failure mode that limits long-term reliability on cooled bench instruments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eRF and Microwave Design \/ R\u0026amp;D\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eFor RF and microwave design teams characterizing PLL synthesizers, mixer spurious products, amplifier compression, and front-end module performance, the UTS5026A’s 26.5 GHz reach with -107 dBc\/Hz typical phase noise gives the instrument the headroom to act as the reference measurement on the bench. The 100,001-point sweep resolution, ±0.40 dB amplitude accuracy at 50 MHz, and full SCPI\/LXI remote control make the analyzer a primary fixture in R\u0026amp;D characterization workflows.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR and LTE Cellular Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eWith the UTS5000A-NR, FDD-LTE, and TDD-LTE demodulation licenses, the analyzer covers sub-6 GHz cellular bands plus 5G NR FR2 mmWave allocations in the 24.25 to 26.5 GHz range. Combined with the I\/Q analyzer’s 40 MHz (B40) analysis bandwidth, the instrument supports waveform-level evaluation of base-station transmitters, small-cell units, and cellular-band devices.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eEMC Pre-Compliance and Production Test Labs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eProduction characterization labs and EMC pre-compliance benches use the UTS5026A’s combination of 26.5 GHz frequency ceiling, regulatory-grade amplitude accuracy, and the optional UTS5000A-EMI license to run pre-chamber scans across CISPR-band ranges and into 5G transceiver and radar emission bands. Free firmware updates plus no-expiration license unlocks keep the instrument current as standards evolve.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurement option licenses (no-expiration unlock)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-NR\u003c\/strong\u003e — 5G New Radio (NR) demodulation analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-FDD-LTE\u003c\/strong\u003e — LTE FDD demodulation analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-TDD-LTE\u003c\/strong\u003e — LTE TDD demodulation analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-VSA\u003c\/strong\u003e — Digital demodulation (ASK\/FSK\/PSK\/QAM\/MSK\/DPSK) with EVM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-I\/Q\u003c\/strong\u003e — I\/Q analyzer (25 MHz \/ 40 MHz with B40 analysis BW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-EMI\u003c\/strong\u003e — EMI pre-compliance measurement to 26.5 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-AMA\u003c\/strong\u003e — Analog AM\/FM demodulation, 2 MHz to 26.5 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-PNM\u003c\/strong\u003e — Phase Noise Measurement (dedicated mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-AMK\u003c\/strong\u003e — Advanced Measurement Kit (channel power, ACPR, OBW, T-power, harmonics)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS5000A-P26\u003c\/strong\u003e — Preamplifier gain option (unlocks -163 dBm\/Hz typ. DANL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRF cables and connector kits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-CK02 kit\u003c\/strong\u003e — RF cables and connectors: UT-W03-40GHz cable, UT-C04-40GHz adapter, UT-C03-18GHz adapter, UT-W03 SMA-SMB cable, UT-C01 SMA-N adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNear-field probes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-EMI01 kit\u003c\/strong\u003e — Four near-field probes: NFP-3G-P1 (30 MHz–3 GHz, 10 cm range), NFP-3G-P2 (30 MHz–3 GHz, 3 cm range), NFP-2G-P3 (30 MHz–2 GHz, 5 mm resolution), NFP-3G-P4 (30 MHz–3 GHz, 2 mm resolution)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat's the difference between the UTS5000A and the UTS3000A series?\u003c\/h3\u003e\n\u003cp\u003eThe two analyzers target different work. The \u003cstrong\u003eUTS3000A series\u003c\/strong\u003e covers 9 kHz to 3.6 \/ 6 \/ 8.4 GHz with a \u003cstrong\u003ebuilt-in tracking generator and standard real-time spectrum analysis plus VNA capability (S11 + S21)\u003c\/strong\u003e; it’s the right choice when work involves stimulus-response measurements, real-time transient capture as a standard capability, and characterization below 8.4 GHz.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eUTS5000A (UTS5026A)\u003c\/strong\u003e is a measurement-only analyzer covering \u003cstrong\u003e9 kHz to 26.5 GHz\u003c\/strong\u003e with no tracking generator and no VNA. It targets work that needs \u003cstrong\u003efrequency reach above 8.4 GHz\u003c\/strong\u003e — K-band SATCOM, 5G NR FR2 mmWave bands, 24 GHz radar, microwave links — or the deeper option library covering 5G NR \/ LTE demodulation and dedicated phase-noise measurement that the UTS3000A doesn’t offer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhich capabilities are standard, and which require optional licenses?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e (included): swept and FFT spectrum analysis from 9 kHz to 26.5 GHz, with all the headline specifications — 1 Hz to 8 MHz RBW, 100,001 sweep points, ±0.40 dB amplitude accuracy at 50 MHz, -107 dBc\/Hz typical phase noise, the full trace-detector set, marker functions, and SCPI\/LAN\/USB remote control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional licenses\u003c\/strong\u003e (each sold separately, no-expiration unlock): UTS5000A-VSA (digital demodulation), UTS5000A-I\/Q (I\/Q analyzer), UTS5000A-EMI (EMI pre-compliance), UTS5000A-NR (5G NR demod), UTS5000A-FDD-LTE and UTS5000A-TDD-LTE (LTE demod), UTS5000A-AMA (analog AM\/FM demod), UTS5000A-PNM (phase-noise measurement), UTS5000A-AMK (advanced measurement kit), and UTS5000A-P26 (preamplifier gain — unlocks the -163 dBm\/Hz typical DANL specification).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eDoes the UTS5026A include a tracking generator or VNA function?\u003c\/h3\u003e\n\u003cp\u003eNo. The UTS5026A is a measurement-only signal analyzer — it does not produce stimulus signals. There is no internal tracking generator, no VNA capability, and no S-parameter measurement function. For applications requiring stimulus-response measurements (filter characterization, antenna VSWR, S11 \/ S21), the UTS3000A series provides those capabilities up to 8.4 GHz with a built-in reflection bridge and tracking generator. For frequencies above 8.4 GHz, an external signal generator paired with the UTS5026A in receive-only mode is the typical configuration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eCan I add the UTS5000A-P26 preamplifier option later, after the original purchase?\u003c\/h3\u003e\n\u003cp\u003eYes. All UTS5000A optional licenses, including the P26 preamplifier gain option, are \u003cstrong\u003eno-expiration license unlocks\u003c\/strong\u003e that can be added at any time after the original instrument purchase. The hardware to support each option is present in every shipping unit; the license unlocks the firmware functionality. Adding P26 after purchase requires no service-depot return.\u003c\/p\u003e\n\u003cp\u003eThat makes a typical procurement path practical: buy the base instrument, then add P26, VSA, I\/Q, or cellular demod licenses as the project mix evolves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eIs the UTS5026A remotely programmable?\u003c\/h3\u003e\n\u003cp\u003eYes. The UTS5026A supports a complete \u003cstrong\u003eSCPI command set\u003c\/strong\u003e covering every front-panel function, accessible over \u003cstrong\u003eUSB-B 2.0, LAN (VXI-11 over 10\/100\/1000 Base RJ-45)\u003c\/strong\u003e, and through the built-in WebServer interface for browser-based access. The full programming manual ships with the instrument, and the analyzer integrates into ATE racks running NI-VISA, Keysight IO Libraries, or any standards-compliant instrument-control framework, with LXI conventions for network discoverability.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 kHz to 26.5 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency reference\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.000000 MHz, ±3×10⁻⁸ stability (20 to 30 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRBW range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz to 3 MHz (10% steps), 4, 5, 6, 8 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRBW selectivity (-60 dB \/ -3 dB)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;4.1 : 1 (-60 dB \/ -3 dB, nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100,001 (max)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 ms to 4,000 s (span ≥ 10 Hz); 1 µs to 6,000 s (zero span)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrigger types\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFree Run, External 1, External 2, Video, Periodic Timer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDANL (preamp on, with UTS5000A-P26)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-163 dBm\/Hz typ. (20 MHz to 1.5 GHz typ.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDANL (preamp off, baseline)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-150 dBm\/Hz typ. (20 MHz to 1.5 GHz typ.)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase noise (1 GHz, 10 kHz \/ 1 MHz offset)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-107 \/ -132 dBc\/Hz typ.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTotal absolute amplitude accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±(0.40 dB + frequency response)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplitude accuracy at 50 MHz\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e±0.40 dB at 50 MHz reference\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReference level range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-170 dBm to +30 dBm, 0.01 dB steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput attenuator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to 50 dB, 2 dB steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum safe input (avg \/ peak \/ DC)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+27 dBm avg \/ +47 dBm peak (gated) \/ +16 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThird-order intercept (TOI, typ.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e+16 dBm typ. (10 MHz to 2 GHz, preamp off)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResidual spurious response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-90 dBm (200 kHz to 26.5 GHz, swept)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTrace detectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNormal, Peak, Sample, Negative Peak, Log Power Average, RMS Average, Voltage Average\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of traces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e15.6 inch, 1920 x 1080, Multi-touch capacitive TFT LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRF input connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNMD 2.92 mm male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExt reference in \/ out\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MHz BNC: -5 to +10 dBm in \/ \u0026gt;0 dBm out, 50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUSB \/ LAN \/ HDMI\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB-A 3.0 (front) + USB-A 2.0 (rear) Host; USB-B 2.0 Device; LAN (VXI11) 10\/100\/1000; HDMI 1.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 to 240 VAC (±10%), 50 \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating temperature \/ humidity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 °C to +40 °C; ≤90% RH below +35 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e445 mm × 311 mm × 195 mm (W × H × D) \/ About 11 kg (24.3 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications \/ ECCN\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus \/ 3A992.a\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003emulti-language safety manual\u003c\/li\u003e\n\u003cli\u003ecalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware options (model number — description):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS5000A-AMA — AM\/FM Analog Demodulation Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-EMI — EMI Pre-Compliance Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-I\/Q — I\/Q Analyzer Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-NR — NR demodulation analysis option for UTS5000A series\u003c\/li\u003e\n\u003cli\u003eUTS5000A-P26 — Preamplifier Gain Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-PNM — Phase Noise Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS5000A-VSA — Digital Demodulation Analysis Option\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703411605728,"sku":"181200100024X","price":28349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS5000A-1.png?v=1790967731"},{"product_id":"uts7032a-32-ghz-interceptor-series-signal-analyzer","title":"UTS7032A 32 GHz Interceptor-Series Signal Analyzer","description":"\u003ch1\u003eThe UNI-T UTS7032A is a 32 GHz signal analyzer for commercial wireless, IoT, EMI pre-compliance, and R\u0026amp;D characterization work. It covers 2 Hz – 32 GHz on a single chassis, with −167 dBm\/Hz displayed average noise level (DANL with preamplifier engaged) and 100,001 sweep points across the span.\u003c\/h1\u003e\n\u003cp\u003eThe UTS7032A is a 32 GHz member of the UTS7000A wide-band signal analyzer line. Real-time spectrum analysis is included as a base instrument capability with 40 MHz analysis bandwidth standard, software-expandable to 85, 160, or 255 MHz via the B-series license options. A full ecosystem of measurement options — 5G NR demodulation, vector signal analysis, I\/Q capture, EMI pre-compliance, phase noise, advanced power measurements, analog demodulation, and LTE FDD\/TDD — expands the same hardware platform to specialized workflows without buying a second instrument.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003ch3\u003eChoosing Your Model: UTS7000A Series\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A name spans eight models on one signal-analyzer platform. The series splits into two configurations: a wide-band configuration (40 MHz baseline real-time bandwidth, software-expandable to 255 MHz) and a narrow-band –NB configuration (20 MHz fixed real-time bandwidth, no upgrade path). Sampling, sweep points, phase noise, DANL, display, interface, and option compatibility are identical across all eight models. Choose the maximum frequency your work requires, then choose the bandwidth configuration.\u003c\/p\u003e\n\u003ctable style=\"table-layout: fixed; width: 100%; height: 292.907px;\"\u003e\n\u003ccolgroup\u003e \u003ccol style=\"width: 22%;\"\u003e \u003ccol style=\"width: 24%;\"\u003e \u003ccol style=\"width: 32%;\"\u003e \u003ccol style=\"width: 22%;\"\u003e \u003c\/colgroup\u003e\n\u003cthead\u003e\n\u003ctr style=\"height: 18.5938px;\"\u003e\n\u003cth style=\"text-align: left; height: 18.5938px;\"\u003eModel\u003c\/th\u003e\n\u003cth style=\"text-align: left; height: 18.5938px;\"\u003eMax Frequency\u003c\/th\u003e\n\u003cth style=\"text-align: left; height: 18.5938px;\"\u003eReal-Time Bandwidth\u003c\/th\u003e\n\u003cth style=\"height: 18.5938px; text-align: left;\"\u003ePaired Preamplifier\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd colspan=\"4\" style=\"height: 19.5938px; text-align: center;\"\u003e\u003cstrong\u003eUTS7000A — Wide-Band Configuration \u003cbr\u003e(40 MHz RTSA, software-expandable to 255 MHz)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e\u003cstrong\u003eUTS7013A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e\u003cstrong\u003eUTS7026A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e\u003cstrong\u003eUTS7032A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.1875px;\"\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e\u003cstrong\u003eUTS7040A\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003e40 MHz baseline; B85 \/ B160 \/ B255 options\u003c\/td\u003e\n\u003ctd style=\"height: 39.1875px;\"\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd colspan=\"4\" style=\"height: 19.5938px; text-align: center;\"\u003e\u003cstrong\u003eUTS7000A–NB — Narrow-Band Configuration \u003cbr\u003e(20 MHz RTSA, fixed, no upgrade path)\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\u003cstrong\u003eUTS7013A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e2 Hz – 13.6 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eUTS7000A-P13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\u003cstrong\u003eUTS7026A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e2 Hz – 26.5 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eUTS7000A-P26\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\u003cstrong\u003eUTS7032A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eUTS7000A-P32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e\u003cstrong\u003eUTS7040A–NB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e2 Hz – 40 GHz\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003e20 MHz fixed\u003c\/td\u003e\n\u003ctd style=\"height: 19.5938px;\"\u003eUTS7000A-P40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eChoose the narrow-band –NB configuration when your signals do not require real-time bandwidth beyond 20 MHz — narrow-channel monitoring, single-carrier characterization, slow-hopping signal capture, or EMI pre-compliance on conducted-emissions spans. Choose the wide-band configuration when wideband real-time capture matters: multi-carrier signals, 5G NR FR2 component carriers, wideband modulated payloads, or transient capture across spans up to 255 MHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency range 2 Hz to 32 GHz, single chassis, no band switching\u003c\/li\u003e\n\u003cli\u003e−167 dBm\/Hz displayed average noise level with the UTS7000A-P32 preamplifier engaged\u003c\/li\u003e\n\u003cli\u003ePhase noise \u0026lt;−110 dBc\/Hz\u003c\/li\u003e\n\u003cli\u003eReal-time spectrum analysis included — 40 MHz baseline, software-expandable to 85, 160, or 255 MHz\u003c\/li\u003e\n\u003cli\u003e100,001 sweep points, six traces, 1 Hz to 10 MHz RBW range\u003c\/li\u003e\n\u003cli\u003e11.6-inch TFT-LCD touchscreen with full front-panel keyboard\u003c\/li\u003e\n\u003cli\u003eUSB 3.0, USB 2.0, LAN, HDMI, 10 MHz reference In\/Out, dual trigger inputs\u003c\/li\u003e\n\u003cli\u003eNine software-licensed measurement options on one platform — 5G NR, VSA, I\/Q, EMI, PNM, AMA, AMK, FDD-LTE, TDD-LTE\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUNI-T UTS7032A Details\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eReal-Time Spectrum Analysis — 40 MHz Standard, Software-Expandable to 255 MHz\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReal-time spectrum analysis is part of the base instrument. The UTS7032A ships configured for 40 MHz of real-time analysis bandwidth and achieves 100% frequency-domain signal capture in under 3.21 µs, so transient and intermittent signals that a swept analyzer would miss are captured into the trace. The instrument supports density spectrum, spectrogram (waterfall), and Power-vs-Time displays simultaneously, plus a Frequency Mask Template (FMT) trigger for capture on signal arrival, departure, or shape change.\u003c\/p\u003e\n\u003cp\u003eWider real-time bandwidth is added by software license without changing chassis. The UTS7000A-B85 raises the real-time bandwidth to 85 MHz, the UTS7000A-B160 to 160 MHz, and the UTS7000A-B255 to 255 MHz — sufficient to capture 5G NR FR2 component carriers and wideband modulated payloads in a single record. The license unlock is field-installable on any 40 MHz wide-band UTS7000A chassis and remains permanent for the life of the instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Range to 32 GHz with Optional Preamplifier\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7032A covers 2 Hz – 32 GHz on a single chassis — no band switching, no external mixers, no second instrument for the higher-frequency portion of the range. The UTS7000A-P32 preamplifier is the paired sensitivity option for this chassis. With the preamplifier engaged, displayed average noise level reaches −167 dBm\/Hz — the floor that small-signal characterization, near-noise-level demodulation, and weak-emitter EMI work depend on. Each chassis in the UTS7000A line has its own paired preamp matched to the chassis's frequency range; the P32 is correct for the 32 GHz chassis.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR Demodulation Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-NR option adds 5G New Radio demodulation analysis directly on the instrument. Combined with the UTS7032A's 32 GHz frequency reach and the real-time bandwidth options up to 255 MHz, the chassis supports commercial 5G NR characterization across sub-6 GHz (FR1) plus the FR2 sub-30 GHz millimeter-wave bands — n258 (24.25–27.5 GHz, European 26 GHz), n257 (26.5–29.5 GHz, global 28 GHz), and n261 (27.5–28.35 GHz, US LMDS 28 GHz) — used in commercial fixed wireless access, base-station equipment development, and 5G UE characterization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eVector Signal Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-VSA option provides general-purpose vector signal analysis with constellation, EVM, and symbol-rate measurement across the major digital modulation families — PSK, QAM, FSK, MSK, and ASK variants. Symbol rate is set from 1 ksps up to the instrument's analysis bandwidth divided by symbol points. Used for protocol bring-up on custom radios, IQ-based modulation verification, and digital-radio R\u0026amp;D where the modulation scheme is not a standardized cellular waveform.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eI\/Q Signal Analyzer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-I\/Q option captures complex baseband I and Q time-record data alongside the frequency-domain view. The captured I\/Q record supports both time-domain and frequency-domain inspection of the same signal, useful for protocol-level debug, custom-modulation verification, and post-capture analysis in external tools where the raw IQ samples are needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eEMI Pre-Compliance Testing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for EMI pre-compliance work with CISPR-style detectors (including quasi-peak), pre-defined limit lines, and meter-mode measurement at fixed frequencies. Pre-scan plus final-scan workflows let a development team identify probable emissions failures and characterize their spectral content before scheduling certified-chamber time. Conducted-emissions spans (Band A, Band B) and broader radiated-emissions sweeps are both supported on the same instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePhase Noise Analysis\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-PNM option provides one-touch phase noise measurement at user-selected offset frequencies, with dBc\/Hz log-plot display. Used for oscillator characterization, synthesizer evaluation, and reference-clock qualification where the instrument's own phase noise floor (\u0026lt;−110 dBc\/Hz) is well below the device under test.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAdvanced Measurement Kit — TOI, OBW, Channel Power, ACPR, CNR, Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-AMK option adds a set of one-touch power and spectral measurements for routine RF characterization work — third-order intercept (TOI), occupied bandwidth (OBW), channel power, adjacent-channel power ratio (ACPR), carrier-to-noise ratio (CNR), harmonic analysis, time-domain power, and spectrum monitoring. Each is a dedicated measurement screen rather than a manual sequence of marker placements, which is the practical difference for production-floor characterization and overnight automated sweeps.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAnalog and LTE Demodulation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-AMA option adds analog demodulation analysis for AM, FM, and PM signals, with measurement of carrier, modulation depth, frequency deviation, SINAD, and total harmonic distortion. The UTS7000A-FDD-LTE and UTS7000A-TDD-LTE options add 3GPP LTE demodulation for FDD and TDD signals respectively, with per-resource-block EVM, frame and slot synchronization, PDSCH and PUSCH characterization, and OFDM signal analysis. Each is a separate license and operates as a dedicated measurement mode on the instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003ePrimary Applications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e5G NR Sub-6 and Commercial Wireless Equipment Development\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7032A's 32 GHz frequency reach covers commercial 5G NR sub-6 (FR1) plus the full FR2 sub-30 GHz commercial millimeter-wave bands n258, n257, and n261, supporting commercial base-station development, fixed wireless access equipment, and 5G UE characterization across the sub-30 GHz mmWave allocations. The UTS7000A-NR demodulation option, the real-time bandwidth options up to 255 MHz, and the I\/Q time-record option are the three pieces a typical commercial 5G NR bench will use together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWireless and IoT Protocol Bring-Up\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor 2.4 GHz and 5 GHz commercial bands — Wi-Fi 6 \/ 6E, Bluetooth, Zigbee, LoRa, and custom proprietary radios — the chassis pairs with the UTS7000A-VSA for digital modulation characterization and the UTS7000A-I\/Q for time-record capture used in protocol-level debug and post-capture analysis. Real-time analysis bandwidth options support wideband channels and frequency-hopping signal capture.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEMI Pre-Compliance and Spectral Hygiene\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS7000A-EMI option configures the instrument for conducted and radiated emissions pre-compliance work — CISPR-style detectors including quasi-peak, pre-defined limit lines, and pre-scan plus final-scan workflows. For power-electronics designs where switching-frequency emissions and harmonics need to be characterized before chamber time, the combination of EMI option plus the UTS7000A-AMK measurement kit (harmonic analysis, spectrum monitoring) supports a complete pre-compliance bench on one instrument.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eR\u0026amp;D Characterization and Spectrum Monitoring\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor general signal-analysis R\u0026amp;D work — oscillator and synthesizer phase-noise qualification, intermodulation distortion measurement, spurious search, weak-signal detection, and long-duration spectrum monitoring — the chassis's −167 dBm\/Hz noise floor (with preamp), 100,001 sweep points, six trace memories, and real-time density-spectrum display cover the day-to-day workflows. The UTS7000A-PNM phase noise option and the UTS7000A-AMK measurement kit are the most-used adds for this work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eAccessories and Family Options\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReal-time bandwidth options\u003c\/strong\u003e (software licenses, wide-band configuration only):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz real-time analysis bandwidth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePaired preamplifier option\u003c\/strong\u003e (frequency-matched to this chassis):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-P32 — preamplifier for UTS7032A and UTS7032A-NB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMeasurement function options\u003c\/strong\u003e (software-licensed; compatible with all UTS7000A chassis including –NB):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR demodulation analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — vector signal analysis\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q signal analyzer\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI pre-compliance testing\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — phase noise measurement\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — advanced measurement kit\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMA — analog demodulation (AM\/FM\/PM)\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — LTE FDD demodulation\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — LTE TDD demodulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003ch3\u003eWhich preamplifier do I order with the UTS7032A?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A-P32 is the matched preamplifier for the 32 GHz chassis. Each chassis in the UTS7000A line has its own frequency-matched preamp; using a preamp from a lower-frequency chassis would limit the sensitivity range you can use across the UTS7032A's full span.\u003c\/p\u003e\n\u003ch3\u003eIs the tracking generator included or available as an option?\u003c\/h3\u003e\n\u003cp\u003eThe UTS7000A line does not include a tracking generator on any chassis. For scalar network analysis on a UNI-T signal-analyzer platform with a built-in tracking generator, the UTS5000A series is the alternate instrument.\u003c\/p\u003e\n\u003ch3\u003eCan the real-time analysis bandwidth be expanded after purchase?\u003c\/h3\u003e\n\u003cp\u003eYes — the UTS7032A ships with 40 MHz real-time bandwidth and can be expanded by adding the UTS7000A-B85 (85 MHz), UTS7000A-B160 (160 MHz), or UTS7000A-B255 (255 MHz) bandwidth options. These are field-installable software licenses — purchase, register, and install via the chassis Option Install menu.\u003c\/p\u003e\n\u003ch3\u003eAre the measurement options installed in the factory, or can I license them later?\u003c\/h3\u003e\n\u003cp\u003eThe nine measurement options — 5G NR, VSA, I\/Q, EMI, PNM, AMK, AMA, FDD-LTE, TDD-LTE — install as software licenses on the instrument and can be added at any time after purchase. Each option installs and activates independently.\u003c\/p\u003e\n\u003ch3\u003eDoes the UTS7032A support remote programming and automation?\u003c\/h3\u003e\n\u003cp\u003eYes. The instrument supports SCPI programming over LAN and USB, with the standard interface set including USB 3.0 host, USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz reference In\/Out, external reference input, and two trigger inputs.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eUTS7032A\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 Hz – 32 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-time analysis bandwidth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 MHz baseline; software-expandable to 85 \/ 160 \/ 255 MHz via B-option licenses\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplayed average noise level\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e−167 dBm\/Hz (with UTS7000A-P32 preamp engaged)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase noise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;−110 dBc\/Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.001 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResolution bandwidth (RBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz – 3 MHz (10% steps), 4 \/ 5 \/ 6 \/ 8 \/ 10 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eup to 100,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTraces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.6-inch TFT-LCD touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 3.0 \/ USB 2.0 host, USB-Device, LAN, HDMI, 10 MHz Ref In\/Out, Ext Ref In, 2× Trigger In, Headphone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking generator\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNot available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003eIncluded in box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003emulti-language safety manual\u003c\/li\u003e\n\u003cli\u003ecalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSoftware options (model number — description):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS7000A-AMA — Analog Demodulation Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B160 — 160 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B255 — 255 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-B85 — 85 MHz Real-Time Analysis Bandwidth License\u003c\/li\u003e\n\u003cli\u003eUTS7000A-EMI — EMI Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-I\/Q — I\/Q Analyzer Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-NR — 5G NR Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P13 — 13.6 GHz Preamplifier Option for UTS7013A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P26 — 26.5 GHz Preamplifier Option for UTS7026A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P32 — 32 GHz Preamplifier Option for UTS7032A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-P40 — 40 GHz Preamplifier Option for UTS7040A\u003c\/li\u003e\n\u003cli\u003eUTS7000A-PNM — Phase Noise Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS7000A-VSA — Vector Signal Analysis Option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703411638496,"sku":"181200100064X","price":37799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS7000A-1_ef6893bd-8ed0-4bfe-a645-39d6ce6173c7.png?v=1790967731"},{"product_id":"uts3084a-8-4-ghz-performance-series-signal-analyzer","title":"UTS3084A 8.4 GHz Performance-Series Signal Analyzer","description":"\u003ch1\u003eUNI-T UTS3084A Signal Analyzer | 8.4 GHz Real-Time Spectrum + VNA + Tracking Generator\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eThe UNI-T UTS3084A is a 8.4 GHz real-time signal analyzer with built-in vector network analyzer (VNA) and tracking generator.\u003c\/strong\u003e It's a different class of instrument from a swept-spectrum analyzer, sized for advanced RF design, EMC engineering and modulated-carrier characterization. Frequency coverage runs 9 kHz to 8.4 GHz with 1 Hz resolution; minimum resolution bandwidth is 1 Hz; maximum resolution bandwidth is 10 MHz; typical displayed average noise level reaches -165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on); and phase noise runs -100 dBc\/Hz typical at 10 kHz offset. The 10.1-inch 1280 × 800 capacitive multi-touch display surfaces real-time, swept, VNA, and (with optional licenses) demodulation modes without burying them behind soft-key paths.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe UTS3000A is built around three architectural pillars that swept-spectrum analyzers do not have: real-time spectrum analysis, vector network analysis with S11\/S21, and digital signal demodulation.\u003c\/strong\u003e Real-time spectrum is standard at 10 MHz bandwidth (extendable to 40 MHz with the optional UTS3000A-B40 license), with 100% probability-of-intercept at 6.68 µs minimum signal duration. The VNA covers 100 kHz to 6 GHz with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration — the reflection bridge is internal. Digital demodulation (optional UTS3000A-VSA) covers ASK, FSK, PSK, QAM, MSK, and DPSK with EVM measurement. The UTS3084A is the family flagship at 8.4 GHz, extending spectrum measurement reach into X-band radar work, C-band satellite uplinks, and the upper microwave region while preserving the full real-time + VNA + demodulation capability stack to 6 GHz.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Coverage:\u003c\/strong\u003e 9 kHz to 8.4 GHz signal analysis\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Spectrum (Standard):\u003c\/strong\u003e 10 MHz default; 40 MHz optional with UTS3000A-B40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In VNA (Standard):\u003c\/strong\u003e S11 + S21, Smith chart, polar coordinates (100 kHz to 6 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTracking Generator (Standard):\u003c\/strong\u003e 100 kHz to 6 GHz, output -40 to 0 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e DANL -165 dBm\/Hz typical (200 MHz to 1.5 GHz, preamp on)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Noise:\u003c\/strong\u003e -100 dBc\/Hz typical at 10 kHz offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution Bandwidth:\u003c\/strong\u003e 1 Hz to 10 MHz in 1-3-10 steps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep Resolution:\u003c\/strong\u003e 40,001 sweep points; minimum RBW 1 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Trace Display:\u003c\/strong\u003e 12 real-time \/ 6 swept simultaneous traces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Mask Trigger:\u003c\/strong\u003e FMT for transient and episodic signal capture\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e 10.1-inch 1280 × 800 capacitive multi-touch HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectivity:\u003c\/strong\u003e USB-Host, USB-Device, LAN (VXI-11), HDMI, 10 MHz reference in\/out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProgrammability:\u003c\/strong\u003e SCPI over USB-TMC, Socket, VXI-11; WebServer; LabVIEW; NI-VISA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Packages:\u003c\/strong\u003e B40, AMK, EMI, AMA, VSA (digital demod), I\/Q Analyzer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eUNI-T UTS3084A Detailed Features\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Coverage (9 kHz to 8.4 GHz)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe UTS3084A covers 9 kHz to 8.4 GHz with 1 Hz frequency resolution — the family flagship at the top of the Performance Series frequency reach. The range adds X-band radar work below 8.4 GHz, C-band satellite uplinks, microwave power-amplifier characterization in the GaN device space, and the full sub-X-band frequency space on a single instrument. Tracking generator and VNA modes cover 100 kHz to 6 GHz; spectrum measurement extends to 8.4 GHz across the entire Performance Series capability stack — see the FAQ for stimulus-response measurement above 6 GHz.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eReal-Time Spectrum Analysis (Standard)\u003c\/h3\u003e\n\u003cp\u003eReal-time spectrum analysis is included as standard, not as an option or upsell. Default real-time bandwidth is 10 MHz; the optional UTS3000A-B40 license extends this to 40 MHz. The signature display mode is the density spectrogram — consecutive FFT frames overlaid with probability-density coloration, surfacing low-amplitude signals hidden under stronger ones and revealing time-frequency structure that swept measurement collapses into a single trace. Maximum sampling rate 51.2 MSa\/s; FFT rate 146,253 frames\/second nominal; 12 simultaneous traces (vs. 6 swept). Eight display modes cover Normal, Density, Spectrogram, PvT, PvT Spectrum, PvT Spectrogram, Powergram, Powergram Spectrogram. The 100% probability-of-intercept minimum signal duration is 6.68 µs at 40 MHz span (default Kaiser window) — a guaranteed-capture spec swept analyzers fundamentally cannot match.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eBuilt-In VNA: S11 + S21 (100 kHz to 6 GHz, Standard)\u003c\/h3\u003e\n\u003cp\u003eVector network analysis is included as standard, not as a separate instrument or option. S11 reflection and S21 transmission cover 100 kHz to 6 GHz with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration. The 6 GHz VNA ceiling is below the 8.4 GHz spectrum range — spectrum measurement extends to 8.4 GHz; VNA stimulus-response is supported 100 kHz to 6 GHz, covering the full 5G NR n77\/n78\/n79 band set, Wi-Fi 6E, and most cellular and consumer-radio component characterization. Display formats include logarithmic and linear amplitude, Smith chart, polar coordinate. Mechanical calibration: Open, Short, Load, Through, Custom supported by the UT-3009F\/M cal kit (DC to 9 GHz). The reflection bridge is internal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eBuilt-in VNA: S11 reflection and S21 transmission, 100 kHz–6 GHz, with Smith chart and polar coordinates.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eFrequency Mask Template trigger (FMT) for capturing episodic and transient signals.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eFrequency Mask Template Trigger (FMT)\u003c\/h3\u003e\n\u003cp\u003eThe Frequency Mask Template (FMT) trigger captures episodic and transient signals that exceed a user-defined spectral mask. Mask types: Upper, Lower, Both. Trigger criteria: Enter, Leave, Inside, Outside, Enter-Leave, Leave-Enter — supporting both threshold-crossing and dwell-time qualification. Combined with the real-time spectrum mode and 6.68 µs 100% POI minimum signal duration, FMT captures intermittent emissions, transient interference, and frequency-hopping transitions that fall between sweeps on a swept-spectrum analyzer. For radar pulse analysis, EMI event capture, and protocol-state spectral characterization, FMT is the trigger architecture that turns rare events into reliable measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eDigital Signal Demodulation (UTS3000A-VSA Option)\u003c\/h3\u003e\n\u003cp\u003eThe optional UTS3000A-VSA Vector Signal Analyzer license adds digital demodulation across the modulation-scheme set used in modern radio: ASK (2\/4\/8\/16), FSK (2\/4\/8\/16), PSK (BPSK, QPSK, OQPSK, 8PSK), DPSK, QAM (16\/32\/64\/128\/256), and MSK. Symbol error statistics include EVM (rms and peak), magnitude error, phase error, IQ offset, carrier offset, SNR, quadrature error, and gain imbalance. Display formats: constellation diagrams, IQ time-domain plots, eye diagrams (I and Q), and error-vector time\/frequency-domain views. Measurement filters: Raised Cosine, RRC, Gaussian, EDGE, CDMA, rectangular; symbol length 10 to 4,096; over-sampling rates 4 through 20. For modulated-carrier characterization where the question is signal quality on a bench-grade radio design, the VSA option replaces a separate vector signal analyzer instrument.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eDigital demodulation analysis (UTS3000A-VSA option): ASK, FSK, PSK, QAM, MSK, DPSK with EVM measurement.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eTypical DANL of -165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on) for weak-signal detection.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eSensitivity for Weak-Signal Detection (DANL -165 dBm\/Hz typ.)\u003c\/h3\u003e\n\u003cp\u003eDisplayed average noise level (DANL) reaches -165 dBm\/Hz typical with the preamplifier engaged in the 200 MHz to 1.5 GHz band, and -166 dBm\/Hz typical at 10 MHz to 200 MHz — the deepest sensitivity in the Performance Series. Across band, typical preamp-on DANL tracks from -153 dBm\/Hz at 1–10 MHz to -158 dBm\/Hz at the 7.5–8.4 GHz upper edge. With 0 dB attenuation, 1 Hz RBW, sample or average detection, and average \u0026gt;50, the noise floor supports detection of the low-amplitude phenomena that distinguish a quiet design from a marginal one — weak spurious emissions on power amplifiers, low-microwave harmonic content from wide-bandgap power stages, and modulated-carrier signal-integrity work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eEMI Pre-Compliance Testing (UTS3000A-EMI Option)\u003c\/h3\u003e\n\u003cp\u003eThe optional UTS3000A-EMI package adds CISPR-specification resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz at −6 dB), quasi-peak and EMI-average detectors, and built-in limit masks for the major regulatory standards (AS-NZS, BellCore, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI; plus custom limits). Scan workflow supports Scan-Search-Measure with signal-table reporting. Combined with the optional UTS-EMI01 near-field probe kit (four probes covering 30 MHz to 3 GHz), the analyzer supports radiated-emission pre-compliance measurement on the engineering bench — useful for catching mitigation needs before the compliance lab visit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eEMI pre-compliance with CISPR-spec RBWs and quasi-peak \/ EMI-average detectors (UTS3000A-EMI option).\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eFront-panel: RF input (N-female), TG output (N-female). Rear: HDMI, USB-A, USB-B, LAN, 10 MHz reference, external trigger.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eComprehensive Interface Set\u003c\/h3\u003e\n\u003cp\u003eFront-panel interfaces include the RF input (50 Ω, N-type female) and the tracking-generator source output (50 Ω, N-type female). The 10.1-inch capacitive multi-touch display is also front-panel. Rear-panel interfaces support automated test integration: HDMI 1.4 video output for an external monitor; USB-Host (USB-A) for thumb-drive screenshot\/data export and firmware update; USB-Device (USB-B) for direct PC connection over SCPI; LAN (VXI-11, 10\/100\/1000 Base, RJ-45) for network-based remote control; 10 MHz reference input\/output (BNC, 50 Ω) for synchronization with other instruments; external trigger input (TTL, BNC); and audio output (3.5 mm). SCPI is supported over both USB and LAN.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eSCPI, WebServer, and Multi-Platform Remote Control\u003c\/h3\u003e\n\u003cp\u003eRemote control supports SCPI over USB-TMC, Socket, and VXI-11; web-browser access through the built-in WebServer (PCs and mobile phones); LabVIEW and NI-VISA driver compatibility; and the UNI-T Device Manager software (V2.5.0 and higher) for instrument management over LAN or USB flash drive. The WebServer enables remote viewing, trace-data export, and SCPI control without installing a driver — useful for distributed test setups and for remote bench monitoring during long-duration EMC sweeps. The 10.1-inch capacitive multi-touch HD display (1280 × 800 native, RGB vertical pixel layout) provides the local user interface with drag-to-pan, pinch-to-zoom, and tap-to-place-marker gesture support.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cfigure\u003e\u003c\/figure\u003e\n\u003cspan\u003eSCPI over USB-TMC, Socket, VXI-11; WebServer browser-based remote control; LabVIEW\/NI-VISA support.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eAdvanced RF Design and 5G NR Characterization\u003c\/h3\u003e\n\u003cp\u003eFor X-band radar work below 8.4 GHz, C-band satellite uplinks, microwave power-amplifier characterization in the GaN device space, and 5G NR mid-band measurement with full headroom for harmonic and spurious analysis, the UTS3084A is the family flagship at 8.4 GHz. The real-time + VNA + tracking-generator capability set carries through the full sub-6 GHz range; spectrum measurement extends to 8.4 GHz across the entire Performance Series capability stack.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eEMC Pre-Compliance and Power-Electronics EMI\u003c\/h3\u003e\n\u003cp\u003eFor wide-bandgap power-electronics microwave characterization where the question is GaN-device harmonic content well into the low-microwave region, EMC pre-compliance with extended frequency reach, and the full radiated-emissions range above the CISPR cap, the UTS3084A pairs 8.4 GHz spectrum reach with real-time mode for transient capture and the built-in 6 GHz VNA for EMI-filter characterization.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch3\u003eVNA Component Characterization and Network Analysis\u003c\/h3\u003e\n\u003cp\u003eFor component characterization across the cellular, Wi-Fi, and sub-6 GHz consumer-radio range — with spectrum measurement reach extending to 8.4 GHz for harmonic and spurious work — the built-in VNA covers 100 kHz to 6 GHz with S11\/S21, Smith chart, and polar-coordinate visualization. The UT-3009F\/M calibration kit (DC to 9 GHz) supports the full VNA range. Spectrum measurement supported to 8.4 GHz; stimulus-response measurements above 6 GHz require an external generator (see FAQ).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eAccessories \u0026amp; In the Box\u003c\/h2\u003e\n\u003ch3\u003eStandard Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord × 1\u003c\/li\u003e\n\u003cli\u003eUT-D14 USB cable × 1\u003c\/li\u003e\n\u003cli\u003eUTS3084A signal analyzer (instrument)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Optional Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-3009F\/M VNA Calibration Kit\u003c\/strong\u003e — recommended pairing for VNA mode (DC to 9 GHz; supports Open\/Short\/Load\/Through mechanical calibration).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3000A-B40\u003c\/strong\u003e — extends real-time bandwidth from 10 MHz to 40 MHz (license-key unlock).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS3000A-AMK\u003c\/strong\u003e Advanced Measurement Kit; \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e EMI Pre-Compliance; \u003cstrong\u003eUTS3000A-AMA\u003c\/strong\u003e Analog Demodulation; \u003cstrong\u003eUTS3000A-VSA\u003c\/strong\u003e Vector Signal Analyzer (digital demod); \u003cstrong\u003eUTS3000A-I\/Q\u003c\/strong\u003e I\/Q Analyzer — license-key software unlocks (see FAQ for capability summary).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-EMI01 Near-Field Probe Kit\u003c\/strong\u003e — four probes covering 30 MHz to 3 GHz for radiated-emission scouting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUT-CK01 Cable and Adapter Accessory Kit\u003c\/strong\u003e — SMA-N adapters and cables for general RF bench work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUTS-T01 \/ UTS-T02 Antenna Pairs\u003c\/strong\u003e — Wi-Fi\/Bluetooth (2400–2500 MHz) and cellular-band (824–960 \/ 1710–1990 MHz) antenna pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eFrequently Asked Questions\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat is the tracking generator and VNA frequency range?\u003c\/h3\u003e\n\u003cp\u003eOn the UTS3084A, both the tracking generator and the VNA cover \u003cstrong\u003e100 kHz to 6 GHz\u003c\/strong\u003e. TG output adjusts -40 to 0 dBm in 0.5 dB steps with ±3 dB flatness referenced to 50 MHz. VNA mode supports S11\/S21 with 80 dB S21 dynamic range and \u0026gt;40 dB S11 directivity after calibration. \u003cstrong\u003eImportant:\u003c\/strong\u003e the 6 GHz TG\/VNA ceiling is below the 8.4 GHz spectrum range. Spectrum measurement is supported across the full 9 kHz to 8.4 GHz range; stimulus-response (TG, VNA S11\/S21) is supported 100 kHz to 6 GHz. The 6 GHz range covers the full 5G NR n77\/n78\/n79 band set, Wi-Fi 6E, and most cellular and consumer-radio component characterization. Recommended cal kit: UT-3009F\/M (DC to 9 GHz).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhich features are standard and which require optional packages?\u003c\/h3\u003e\n\u003cp\u003eThe UTS3000A includes \u003cstrong\u003eSpectrum Analyzer\u003c\/strong\u003e, \u003cstrong\u003eReal-time Spectrum Analyzer\u003c\/strong\u003e (10 MHz default real-time bandwidth), \u003cstrong\u003eVector Network Analyzer\u003c\/strong\u003e (S11 + S21), and \u003cstrong\u003eTracking Generator\u003c\/strong\u003e as \u003cstrong\u003estandard\u003c\/strong\u003e, at no extra cost. Six \u003cstrong\u003eoptional\u003c\/strong\u003e license-key software unlocks extend the capability set: \u003cstrong\u003eUTS3000A-B40\u003c\/strong\u003e (extends real-time bandwidth to 40 MHz), \u003cstrong\u003eUTS3000A-AMK\u003c\/strong\u003e (Advanced Measurement Kit: channel power, ACP, OBW, CNR, TOI, harmonics), \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e (EMI pre-compliance with CISPR RBWs and quasi-peak\/EMI-average detectors), \u003cstrong\u003eUTS3000A-AMA\u003c\/strong\u003e (analog AM\/FM\/PM demod), \u003cstrong\u003eUTS3000A-VSA\u003c\/strong\u003e (digital demod: ASK\/FSK\/PSK\/QAM\/MSK\/DPSK with EVM), and \u003cstrong\u003eUTS3000A-I\/Q\u003c\/strong\u003e (50 Hz to 8.4 GHz I\/Q analysis with 14-bit ADC, 51.2 MSa\/s).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eDoes this analyzer support EMI pre-compliance testing?\u003c\/h3\u003e\n\u003cp\u003eYes, with the optional \u003cstrong\u003eUTS3000A-EMI\u003c\/strong\u003e package. EMI mode adds CISPR-specification resolution bandwidths (200 Hz, 9 kHz, 120 kHz, 1 MHz at −6 dB), quasi-peak and EMI-average detectors, a peak Scan-Search-Measure sweep workflow, and built-in limit masks for the major regulatory standards (AS-NZS, BellCore, DEF-STAN, DO-160, EN, FCC, GB9254, MIL-461, VCCI; plus custom limits). Combined with the optional \u003cstrong\u003eUTS-EMI01 near-field probe kit\u003c\/strong\u003e (four probes covering 30 MHz to 3 GHz), the analyzer supports radiated-emission pre-compliance measurement on the engineering bench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eHow does the UTS3000A differ from the UTS3000T+ family?\u003c\/h3\u003e\n\u003cp\u003eThe UTS3000A and UTS3000T+ are different classes of instrument for different audiences. The \u003cstrong\u003eUTS3000T+ is a swept-spectrum analyzer\u003c\/strong\u003e with optional analysis kits — sized for value-tier RF design, education, and pre-compliance EMI work. The \u003cstrong\u003eUTS3000A is a Performance-Series real-time signal analyzer\u003c\/strong\u003e with built-in VNA and digital demodulation — sized for advanced RF design, professional EMC, and modulated-carrier characterization where capturing transient and modulated signals is the measurement workload.\u003cbr\u003e\u003cbr\u003eConcrete differences: \u003cstrong\u003ereal-time spectrum\u003c\/strong\u003e is standard on the A (10 MHz, optionally 40 MHz with B40); the T+ has no real-time mode. \u003cstrong\u003eVNA with S11\/S21, Smith chart, polar coordinate\u003c\/strong\u003e is standard on the A; the T+ supports basic reflection only with an external bridge accessory. \u003cstrong\u003eRBW range\u003c\/strong\u003e extends to 10 MHz on the A vs 3 MHz on the T+ flagship pair. \u003cstrong\u003ePhase noise\u003c\/strong\u003e is -100 dBc\/Hz typ at 10 kHz on the A vs \u0026lt;-98 dBc\/Hz on the T+. \u003cstrong\u003eReal-time traces\u003c\/strong\u003e support 12 simultaneous traces on the A vs 6 swept on the T+ flagship pair. The A also adds the Frequency Mask Template trigger (FMT) and the optional UTS3000A-VSA digital demodulation package — capabilities not available on the T+. Pricing reflects the architectural difference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch3\u003eWhat measurements are supported on the UTS3084A above 6 GHz?\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eSpectrum measurement\u003c\/strong\u003e is supported across the full 9 kHz to 8.4 GHz range — including all standard spectrum modes, all detector types, real-time spectrum (with optional UTS3000A-B40), all measurement markers, harmonic measurement (UTS3000A-AMK), EMI pre-compliance (UTS3000A-EMI), and the optional UTS3000A-I\/Q analyzer.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eStimulus-response measurement\u003c\/strong\u003e using the built-in tracking generator and VNA is supported across \u003cstrong\u003e100 kHz to 6 GHz\u003c\/strong\u003e. For component characterization between 6 GHz and 8.4 GHz, an external signal generator is required to drive the device under test; the spectrum and real-time modes still measure the response. The 6 GHz TG\/VNA range covers the full 5G NR n77\/n78\/n79 band set, Wi-Fi 6E, and the cellular and consumer-radio component-characterization frequency space — most engineering work above 6 GHz is in spectrum-measurement mode rather than stimulus-response.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 kHz to 8.4 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Resolution\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhase Noise (10 kHz \/ 1 MHz offset)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-100 dBc\/Hz typ \/ -112 dBc\/Hz typ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAmplitude Precision\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u0026lt; 0.7 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9 kHz to 3.6 GHz, ±0.6 dB; 3.6 to 8.4 GHz, ±0.8 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplayed Average Noise Level (typ.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-165 dBm\/Hz (200 MHz to 1.5 GHz, preamp on)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eResolution Bandwidth (RBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz to 10 MHz in 1-3-10 steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVideo Bandwidth (VBW)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 Hz to 10 MHz in 1-3-10 steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSweep Points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40,001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNumber of Traces (swept \/ real-time)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6 swept \/ 12 real-time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection Modes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSample, Peak, Negative Peak, Normal, Average\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-Time Bandwidth (std. \/ opt.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10 MHz standard \/ 40 MHz with UTS3000A-B40\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-Time 100% POI Min. Signal Duration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.68 µs at 40 MHz span (Kaiser window)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReal-Time FFT Rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e146,253 frames\/second (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTracking Generator Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kHz to 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTG Output Power Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-40 dBm to 0 dBm in 0.5 dB steps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Frequency Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 kHz to 6 GHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Measurement Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eS11 reflection, S21 transmission\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA S21 Dynamic Range \/ S11 Directivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 dB \/ \u0026gt;40 dB (after cal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Measurement Points\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e101 to 10,001 (default 201)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVNA Calibration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen, Short, Load, Through, Custom (mechanical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency Mask Trigger (FMT)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUpper, Lower, Both; 0.5 dB resolution; 0 s to 500 ms delay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Continuous-Wave Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e≤+30 dBm (attenuation \u0026gt;20 dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum Safe DC Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e50 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.1-inch 1280 × 800 capacitive multi-touch HD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterfaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB-Host, USB-Device, LAN (VXI-11, 10\/100\/1000), HDMI 1.4, External Trigger, Audio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProgrammability\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eSCPI over USB-TMC, Socket, VXI-11; WebServer; LabVIEW; NI-VISA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 to 240 VAC, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOperating \/ Storage Temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0 to +40 °C \/ -20 to +70 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions (W × H × D) \/ Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e378 mm × 218 mm × 120 mm (W × H × D) \/ 4.96 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCE, cETLus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003ch4\u003eOptions \u0026amp; Accessories\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eIncluded in box:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003cli\u003eUSB2.0 printing cable\u003c\/li\u003e\n\u003cli\u003eEnglish download guide\u003c\/li\u003e\n\u003cli\u003emulti-language safety manual\u003c\/li\u003e\n\u003cli\u003ecalibration report (COC)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSoftware options (model number — description):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUTS3000A-AMA — AM\/FM Analog Demodulation Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-AMK — Advanced Measurement Kit Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-B40 — 40MHz Real-Time Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-EMI — EMI Pre-Compliance Measurement Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-FDD-LTE — FDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-I\/Q — I\/Q Modulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-NR40 — UTS3000A-NR 5G 40MHz New Radio Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-PNM — Phase Noise Measurement option for UTS3000A series\u003c\/li\u003e\n\u003cli\u003eUTS3000A-TDD-LTE — TDD-LTE Demodulation Analysis Option\u003c\/li\u003e\n\u003cli\u003eUTS3000A-VSA — Vector Signal Analysis Demodulation Option\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uni-Trend US","offers":[{"title":"Default Title","offer_id":67703411671264,"sku":"181200100040X","price":10799.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/files\/UTS3084A-1.png?v=1790967731"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0356\/8248\/4360\/collections\/UTS3084A_1_sq.jpg?v=1791410484","url":"https:\/\/sperdirect.com\/en-ca\/collections\/signal-analyzers.oembed","provider":"Sper Scientific Direct","version":"1.0","type":"link"}